1,Combinations:
1). The XOU consited of XOFR and XOL. Each unit can be ordered separately.
2). The XOF with water separetor cleans the compressed air of fliud oil, condensation and dirt.
For special application, the standard filter element is 40 micron, also 5 micron also available
3). The XOR maintain imputting constant operating pressure despite fluctuation in line pressure and the amount of air consumed.
4). XOL, The proportional lubricator adds a regulated quantity of oil to the filtered air. The oil-mist content
Proportional to be flow and oil can be added during operation.
The oil drop rate is controlled by the adjustable bolt. Normally 1 to 12 drops/1000L of the air is sufficient
2,Features:
1).FESTO type and quality, can be replaced the Festo same type products.
2).XOU, XOFR, XOF, XOL, XOR
XOU included XOFR and XOL(FR+L)
XOFR included XOF and XOR(F+R)
3).You can use it independent or use the FRL together in the automation area.
4).Smart design and best performance
5).Internal element material is PE/Brass, the micron is 40 micron or 5 micron by your choice.
3,Summary:
Air filter combination mainly include filter, regulator, filter regulator and lubricator.
The products used standardized module design, which can be combined freely and disassemble.
Products design are reasonable and easy to regulate, can satisfy all sorts of pneumatic system operating requirements
Specifications
This series air source treatment unit accessories also available for you.
Other related in this series types,
XOFR
XOF
XOR
XOL
Our company also can provide other air source treatment as below,
1. AC/BC series(Airtac FRL)
2. XG series(Airtac FRL)
3. XU seres(Shako FRL)
4. XAC series
5. XMA series
6. XS series(SNS FRL)
7. XC series(Camozzi FRL)
8. Auto drain
9. Speacial air filter, regulators
More information and details, you can visit our website.
If you have the nonstandard products want to design, don't hesitate to contact us.
XCPC is your good choice in Pneumatic area ! XOU series Air Source Treatment Unit (Festo type FR+L)
1,Combinations:
1). The XOU consited of XOFR and XOL. Each unit can be ordered separately.
2). The XOF with water separetor cleans the compressed air of fliud oil, condensation and dirt.
For special application, the standard filter element is 40 micron, also 5 micron also available
3). The XOR maintain imputting constant operating pressure despite fluctuation in line pressure and the amount of air consumed.
4). XOL, The proportional lubricator adds a regulated quantity of oil to the filtered air. The oil-mist content
Proportional to be flow and oil can be added during operation.
The oil drop rate is controlled by the adjustable bolt. Normally 1 to 12 drops/1000L of the air is sufficient
2,Features:
1).FESTO type and quality, can be replaced the Festo same type products.
2).XOU, XOFR, XOF, XOL, XOR
XOU included XOFR and XOL(FR+L)
XOFR included XOF and XOR(F+R)
3).You can use it independent or use the FRL together in the automation area.
4).Smart design and best performance
5).Internal element material is PE/Brass, the micron is 40 micron or 5 micron by your choice.
3,Summary:
Air filter combination mainly include filter, regulator, filter regulator and lubricator.
The products used standardized module design, which can be combined freely and disassemble.
Products design are reasonable and easy to regulate, can satisfy all sorts of pneumatic system operating requirements
Specifications
This series air source treatment unit accessories also available for you.
Other related in this series types,
XOFR
XOF
XOR
XOL
Our company also can provide other air source treatment as below,
1. AC/BC series(Airtac FRL)
2. XG series(Airtac FRL)
3. XU seres(Shako FRL)
4. XAC series
5. XMA series
6. XS series(SNS FRL)
7. XC series(Camozzi FRL)
8. Auto drain
9. Speacial air filter, regulators
More information and details, you can visit our website.
If you have the nonstandard products want to design, don't hesitate to contact us.
XCPC is your good choice in Pneumatic area !
We are a professional manufacturer and exporter with experience in the line of Tool Carts, Hand Trolley, Platform Hand Truck etc. for many years in China. All raw material of Tool Cart are good quality.
We supply you high-quality products with competitive price and We have large producing capacity, with various of advanced equipments , technique and moulds.
Welcome to our factory, I am sure that both our product in good quality and favourable price can meet your requirements
We are good at all kinds Hand Trolley,such as HT2500,HT2502AL,HT1842
|
Item Number |
Load Capacity(kg) |
Pneumatic Tyre |
L/W/H(mm) |
|
HT2500 |
120 |
10''*3.00-4 |
1170*476*510 |
|
Item Number |
Load Capacity(kg) |
Pneumatic Tyre |
L/W/H(mm) |
|
HT2502AL |
180 |
10''*3.00-4 |
1170*480*490 |
|
Item Number |
Load Capacity(kg) |
Pneumatic Tyre |
L/W/H(mm) |
|
HT1842 |
250 |
10'' |
1450*550*460 |
Hand Trolley
Hand Trolley, Folding Hand Trolley, Hand Cart Trolley
Gainran Hand Truck Co., Ltd. , http://www.wheelbarrowsupplier.com