Arc Infrared Carbon and Sulfur Analyzer-Laboratory Instrument-Carbon Analyzer

Arc Infrared Carbon and Sulfur Analyzer-Laboratory Instrument-Carbon Analyzer

Infrared Carbon and Sulfur Analyzer is used in combination with TR-H86B High-speed Automatic Ignition Furnace. It can rapidly and accurately conduct content determination of carbon and sulfur in materials like steel, iron, alloy, nonferrous metals, cement, minerals and catalysts, etc. This is a high-tech product that integrates light, electrical, computer, and analysis technology into one. It has the advantages of wide measuring range, strong anti-interference ability, complete function, simple operation, accurate and reliable analysis and so on, thus an ideal analysis equipment in determining carbon and sulfur in lots of industries.  

Infrared Carbon and Sulfur Analyzer Main Features:
Adopting infrared detector with low noise, high sensitivity and high stability;
Modular design of the whole machine, which improves the reliability of the instrument;
Automatic linking with electronic balance;
English operation interface, easy to operate and master;
Complete software that can perform more than forty functions like documentation assistance, system monitoring, channel selection, statistics, results correction, breakpoint correction and system diagnosis, etc.  
Dynamic display of the data, and carbon and sulfur release curves during the analysis process;
Wide measuring linear range that can also be extended;
Imported electromagnetic valve to improve the reliability of the air system;
Highly-frequent continuous arc ignition, automatic tracking sample combustion;
Electricity-saving, materials-saving, high speed and accurate

Infrared Carbon and Sulfur Analyzer Main Technical Parameters:
Measuring range: Carbon ω (C) 0.001% -6.0000% (can be extended to 99.999%); Sulfur ω (S) 0.0005% -0.3500% (can be extended to 99.999%) 
Analysis error: Carbon: better than GB/T223.69-1997 standard, Sulfur: better than GB/T223.68-1997 standard
Analysis time: 25-60 seconds Adjustable, generally about 35 seconds 
Electronic Balance: Weighing range :0-300g 
Reading Accuracy: 0.001g 
Work environment: Room temperature :10-30 ºC 
Relative Humidity: less than 75%
Power: good grounding 
Voltage: AC220V ± 5% 
Frequency: 50Hz ± 2%
 

Packing:




Company Information:

      As a diversified manufacturer of high-tech products, it was founded in 1999, and devoted to the products, sales and technical service for various industries and fields like Energy analysis instrument, Oil, coal, steel, and geology; medical analysis and application instruments, biochemistry analyzer, elisa reader, blood analyzer,and urine; as well as laboratory application instruments,autoclave/sterilizer,freeze dryer, incubator,drying oven,balance,ICP,DRS,HPLC,gas chromatography,and spectrophotometer,meanwhile,TRYTE Technologies integrated and purchased some companies of PCB board, highway instruments at home and abroad. Our company has become the "one stop" instrument procurement service provider worthy of the name.
      TRYTE technologies (TRYTE) mainly sell products by selling direct to customer, but also through distributors, resellers and manufacturer representatives, telephone sales and e-commerce sales, customers cover all over 80% of the world's countries and regions.TRYTE have solutions with rules adaptability according to the specific requirements of the design, from the instrument to some laboratories or departments.Whichever kind of solution you choose, you can fully trust it, because it is proved from 100, 00 successful results, leading development process, and decades of actual certification experience.



Why choose us?

1. We supply high quality products with reasonable price.
2. We are the professional manufacturer;
3. Advanced production machine;
4. Strict quality control system;
5. Ten people research&develop team;
6. We have professional sales team;


Arc Infrared Carbon and Sulfur Analyzer-Laboratory Instrument-Carbon Analyzer

Infrared Carbon and Sulfur Analyzer is used in combination with TR-H86B High-speed Automatic Ignition Furnace. It can rapidly and accurately conduct content determination of carbon and sulfur in materials like steel, iron, alloy, nonferrous metals, cement, minerals and catalysts, etc. This is a high-tech product that integrates light, electrical, computer, and analysis technology into one. It has the advantages of wide measuring range, strong anti-interference ability, complete function, simple operation, accurate and reliable analysis and so on, thus an ideal analysis equipment in determining carbon and sulfur in lots of industries.  

Infrared Carbon and Sulfur Analyzer Main Features:
Adopting infrared detector with low noise, high sensitivity and high stability;
Modular design of the whole machine, which improves the reliability of the instrument;
Automatic linking with electronic balance;
English operation interface, easy to operate and master;
Complete software that can perform more than forty functions like documentation assistance, system monitoring, channel selection, statistics, results correction, breakpoint correction and system diagnosis, etc.  
Dynamic display of the data, and carbon and sulfur release curves during the analysis process;
Wide measuring linear range that can also be extended;
Imported electromagnetic valve to improve the reliability of the air system;
Highly-frequent continuous arc ignition, automatic tracking sample combustion;
Electricity-saving, materials-saving, high speed and accurate

Infrared Carbon and Sulfur Analyzer Main Technical Parameters:
Measuring range: Carbon ω (C) 0.001% -6.0000% (can be extended to 99.999%); Sulfur ω (S) 0.0005% -0.3500% (can be extended to 99.999%) 
Analysis error: Carbon: better than GB/T223.69-1997 standard, Sulfur: better than GB/T223.68-1997 standard
Analysis time: 25-60 seconds Adjustable, generally about 35 seconds 
Electronic Balance: Weighing range :0-300g 
Reading Accuracy: 0.001g 
Work environment: Room temperature :10-30 ºC 
Relative Humidity: less than 75%
Power: good grounding 
Voltage: AC220V ± 5% 
Frequency: 50Hz ± 2%
 

Packing:




Company Information:

      As a diversified manufacturer of high-tech products, it was founded in 1999, and devoted to the products, sales and technical service for various industries and fields like Energy analysis instrument, Oil, coal, steel, and geology; medical analysis and application instruments, biochemistry analyzer, elisa reader, blood analyzer,and urine; as well as laboratory application instruments,autoclave/sterilizer,freeze dryer, incubator,drying oven,balance,ICP,DRS,HPLC,gas chromatography,and spectrophotometer,meanwhile,TRYTE Technologies integrated and purchased some companies of PCB board, highway instruments at home and abroad. Our company has become the "one stop" instrument procurement service provider worthy of the name.
      TRYTE technologies (TRYTE) mainly sell products by selling direct to customer, but also through distributors, resellers and manufacturer representatives, telephone sales and e-commerce sales, customers cover all over 80% of the world's countries and regions.TRYTE have solutions with rules adaptability according to the specific requirements of the design, from the instrument to some laboratories or departments.Whichever kind of solution you choose, you can fully trust it, because it is proved from 100, 00 successful results, leading development process, and decades of actual certification experience.



Why choose us?

1. We supply high quality products with reasonable price.
2. We are the professional manufacturer;
3. Advanced production machine;
4. Strict quality control system;
5. Ten people research&develop team;
6. We have professional sales team;

C(1)the stamping process of high production efficiency, and easy to operate, easy to realize mechanization and automation.This is because the stamping is depend on the die and stamping equipment to complete the processing, ordinary press stroke times per minute can reach dozens of times, high pressure to can reach more than hundreds of times or even one thousand times per minute, and every time stamping stroke can get one piece.

(2) when the mold to ensure the stamping precision Stamping Parts of the size and shape, and generally does not destroy the surface of the stamping parts quality, and the life of the mould are long, so the stamping quality is stable, good compatibility, has the characteristics of "the same".

(3) stamping machining size range is larger, more complex shape parts, such as small to watch the stopwatch, big to auto longeron, covering parts, etc., and stamping material hardening effect of cold deformation, the strength and stiffness of stamping was high.

(4) stamping generally no chip broken material, material consumption is less, and do not need other heating equipment, it is a kind of material, machining method of energy saving, stamping parts of the cost is low.

stainless steel parts are very popular in forging process. We can supply big range of such stainless steel stamping parts.

B Main particulars

	MAIN PARTICULARS
Material	stainless steel
Standard	ASTM, ASME, DIN, JIS, ISO, BS, API, EN
Certificate	ISO9001, BV
Dimension	As per drawing, as large as we can
Processing	Laser/Line cutting, Stamping, CNC Punching, CNC Bending, Welding, Assembling, ect.
Finishing surface	Machined surface with oil, blasting and painting, anodize, polishing, powder painting, electrophoretic coating-
Marking	as per clients` requirements
Inspection	material, construction, dimension, heat treatment, hardness, NDT
Quality	ISO9001, PPAP control production
Lead time	10-30 days for sample, consult with customer for mass production
Delivery	Express for sample, ocean shipping/air for mass production
Our Capabilities	CNC machining, CNC center machining, drilling, milling, turning, grinding, tapping, boring
Engineering & manufacturing services	R&D process, tooling and gauging design, product design Integrated CAD/CAM system, test and measuring
Others	Recyclable, in line with environmental requirements and standards, and reliable
Finishing surface	Machined surface with oil, blasting and painting, anodize, polishing, powder painting, electrophoretic coating-

C. Construction

Construction by stamping and machining

D Workmanship

The workmanship have good production practice. Care are taken to ensure High accuracy and smooth surfaces 

E. Certificates

- Material certificates

- Measuring reports

- Inspection protocol

- NDT reports

- Fixed certificate: ISO9001 certificate

Our service

Besides above the general specifications, we can also supply some specific machining parts as clients' requirements.

Package and shipping

Export cartons, pallets, wooden cases, Polybags

container package and container transportation

Stainless Steel Stamping Parts

Stainless Steel Stamping Parts,Metal Stamping Stainless Parts,Stainless Steel Stamping Accessories,Metal Stainless Steel Stamping Parts

Shinvast Industry Ltd , https://www.shinvastindustry.com