1. The appearance of weighing indicator, printer and computer should be kept clean and clean;
2. Regularly check whether the wiring is loose and broken and whether the grounding wire is firm;
3. Keep the junction box dry and clean. The desiccant in the box is periodically dried and replaced. If there is any water drop in the box, it can be dried by a hair dryer.
4. When the instrument is under gross weight, when empty scale, if it is found that the zero cursor is off, it should be cleared before weighing;
5. The electronic loadometer is regularly verified by the legal measurement management department;
6. When off duty, cut off the power of the weighing indicator and other electrical appliances;
7. Suddenly power off, the meter takes 5 minutes to turn on again;
8. It is forbidden to perform arc welding operation on the weighing platform;
9. Always clean the scale platform countertops. The gaps and the bottom of the scale platform must not contain any foreign materials such as gravel coal blocks.
10. The power must be cut off when the machine is off work, and the vehicle platform or the cargo cannot be stopped for a long time on the scale platform.
Heat exchanger parts are an important part of the heat exchanger. During the use of the heat exchanger, the parts may wear out and the entire heat exchanger cannot be used. At this time, we need to replace the damaged parts. When components in a heat exchanger wear out, it can result in product loss in the equipment. Minimize costly downtime by getting replacement parts from Jiema. Worn parts can cause inconsistencies in the production process, slowing down production or stopping production altogether. With Jiema's wide range of heat exchanger replacement parts, you can keep your productivity at peak efficiency and scale up your output reliably. No matter what make or model you have in your facility, we've got the parts you need. Jiema has a large inventory of OEM replacement parts, including most of the well-known brands.
Heat exchanger components include plate heat exchangers, air heat exchangers, and shell-and-tube heat exchangers. Frequently replaced parts include plates and rubber pads of plate heat exchangers, finned tubes of air heat exchangers, condensing coils, seamless steel pipes, U-shaped tubes, tube sheets and flanges of shell-and-tube heat exchangers, etc. In the following, we will further display each component and its characteristics and uses.
Heat Exchanger Parts,Exchanger Pipe,Seamless Tube,Heat Exchanger Tube
Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.jiemaheatexchanger.com