- Model NO.: MVR
- Working Pressure: Low Pressure Pump
- Position of Pump Shaft: Vertical Pump
- Impeller: Open
- Size: 40-250mm
- Slurry Pump Manufacture: Muyuan Pump Industry
- Slurry Pump Type: Vertical Slurry Pumps
- Slurry Pump Seal Type: Gland Seal/Expelelr Seal/Mechanical Seal
- OEM Service: Available
- Trademark: MUYUAN
- Origin: China
- Impeller Number: Single-Stage Pump
- Influent Type of Impeller: Single Suction Pump
- Pump Casing Combined: Single Casing
- Usage: Pump
- Industry: Mining,Chemcial Industry,Metallurgy, Power Plant E
- Slurry Pump Wet End Parts: High Chrome/Rubber/Ceramic
- Pump Color: Yellow/Cutsomized
- Medium Transferred: Ore Slurry/Coal Slurry/Ash Slurry/Lime Slurry etc
- Other Names: Sludge Pump
- Specification: MV
- HS Code: 8413701090
Product Introduction:
The MV/MVR heavy duty sump pump is designed for applications requiring greater reliability and durability. The bearing assembly allows the pump to operate in the "snore" condition without damage to the bearings. It is designed for handling abrasive slurries and corrosive fluids
By using either elastomer or alloy lined wet ends components. The pump is suitable for mining, chemical treatment, waste water treatment, gravel and general process application.
Product Features:
- Fully elastomer lined or hard metal fitted
- Double suction semi-open impeller
- No submerged bearing or packing
- Optional recessed impeller and suction agitator available
- MVR models feature full rubber covering for corrosion resistance
- Can be run in insufficient suction duties
Application Range:
Size: 40 to 250mm
Capacity: 17 to 1000 m3/h
Maximum head: 40m
|
Pump Type |
Pump Model | Size | Flow | Head | Application | Feature |
| MV/MVR Vertical Sump Pump |
40PV-MV | 40 - 250mm | 17-1000 m3/h | 4-40m | –Mineral Processing | –Fully elastomer lined or hard metal fitted |
| 65QV-MV | –Coal Preparation | –Double suction semi-open impeller | ||||
| 100RV-MV | –Chemical Processing | –No submerged bearing or packing | ||||
| 150SV-MV | –Effluent Handling | –Optional recessed impeller and suction agitator available | ||||
| 200SV-MV | –Sand and Gravel | –MVR models feature full rubber covering for corrosion resistance | ||||
| 250TV-MV | –Waste Water | –Can be run in insufficient suction duties |
What is Feeder on the placement machine? What is Feida on the placement machine? Feida is the main accessory of the placement machine. Its function is to mount the SMD patch components on the feeder, and the feeder provides components for the placement machine for patching.
In the placement machine, the feeder functions to supply the chip component SMC/SMD to the placement head in a regular pattern and order for accurate and convenient pickup, which occupies a large number and position in the placement machine. It is also an important part of choosing a placement machine and arranging the placement process. Depending on the SMC/SMD package, feeders typically have a variety of tapes, sticks, waffles, and bulk materials.
Tape feeders with the different size such as 8mm, 16mm, 24mm, 32mm, 44mm, 56mm etc.Panasonic Feeder,Insertion Machine Tape Feeder Unit,Tape Feeder Unit,Feeder Panasonic
Shenzhen Keith Electronic Equipment Co., Ltd. , https://www.aismtks.com