KFM.LB1500 type forced intermittent type asphalt mixing station introduces advanced German technology, adopts the manufacturing technology of Japanese mixing equipment, and combines the characteristics of domestic highways to develop a new type of high-efficiency, fast-transition type asphalt mixing station. The equipment features advanced overall performance, easy operation, high measurement accuracy, and efficient and reliable production capabilities. The mixing building adopts a modular design to make it overall and beautiful in appearance. The production capacity of KFM.LB1500 asphalt mixing plant reaches 120 tons/hour. The whole machine realizes automatic control, full computer monitoring, automatic metering, accurate measurement, and high reliability. Its control system adopts programmable controller and professional industrial control computer. It can automatically, semi-automatically and manually control weighing, mixing and discharging in the production process. The aggregate, mineral powder and asphalt are measured by separate methods. The accuracy and reliability of the ingredients; hot aggregate, ore powder chain hoist, and automatic tensioning device, to meet the actual needs of customers to the maximum, with human characteristics. The equipment has reasonable structure, excellent performance, energy saving, flexible transition, high-tech content and high economic efficiency, and is the ideal equipment for asphalt mixture production in the field of high-grade highways, airports and urban roads.
Cutting Torch Tips
As in welding, you must use the proper size cutting tip if quality work is to be done. The preheat flames must furnish just the right amount of heat, and the oxygen jet orifice must deliver the correct amount of oxygen at just the right pressure and velocity to produce a clean cut. All of this must be done with a minimum consumption of oxygen and fuel gases. Careless workers and workers not acquainted with the correct procedures waste both oxygen and fuel gas.
Each manufacturer makes many different types of cutting tips. Although the orifice arrangements and the tips are much the same among the manufacturers, the part of the tip that fits into the torch head often differs in design.
Because of these differences, there is the possibility of having two or three different types of Cutting Torches in your kits. Make sure that the cutting tips match the cutting attachment and ensure that the cutting attachment matches the torch body. Figure 4-13 shows the different styles of tips, their orifice arrangements and their uses. The tips and sears are designed to produce an even flow of gas and to keep themselves as cool as possible. The seats must produce leakproof joints. If the joints leak, the preheat gases could mix with the cutting oxygen or escape to the atmosphere, resulting in poor cuts or the possibility of flashbacks.
Gas Cutting Nozzles,Gas Plasma Cutting Nozzles,Flame Gas Cutting Nozzle,Plasma Gas Cutting Nozzle
Changzhou Edaweld Trading Company Limited , https://www.edaweld.com