Launch CNC602 220V&110V, Launch CNC 602 a, CNC 602A 2018 Hot Launch CNC602A Car Injector Cleaner&Tester

CNC-602A is an advanced electromechanical product, which can clean and test Auto engine injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle

Feature:
 
* Ultrasonic cleaning: To perform simultaneous cleaning on several injectors, to remove the carbon deposits on the injector completely. 
* Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the lighting of backlight. This test is also for reverse flush.
* Leakage test: To test the sealing and dribbling conditions of injectors under system pressure. 
* Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection. 
* Auto. test: To test injectors by simulating different working conditions. 
* n-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.
 
Specification:
 
 
 
Power supply
 
AC220V±10%,50/60Hz;AC110V±10%, 50/60Hz.
Input Power
250W
Ultrasonic cleaner power
100W
Simulated RPM range
10-9990rpm; step: 10rpm
Time range
1-9999s
Pulse width
0.5-25ms; step 0.1 ms
Fuel tank capacity
4700ml
Dimensions
385mm×410mm×500mm
Weight
35Kg






CNC-602A is an advanced electromechanical product, which can clean and test Auto engine injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle

Feature:
 
* Ultrasonic cleaning: To perform simultaneous cleaning on several injectors, to remove the carbon deposits on the injector completely. 
* Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the lighting of backlight. This test is also for reverse flush.
* Leakage test: To test the sealing and dribbling conditions of injectors under system pressure. 
* Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection. 
* Auto. test: To test injectors by simulating different working conditions. 
* n-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.
 
Specification:
 
 
 
Power supply
 
AC220V±10%,50/60Hz;AC110V±10%, 50/60Hz.
Input Power
250W
Ultrasonic cleaner power
100W
Simulated RPM range
10-9990rpm; step: 10rpm
Time range
1-9999s
Pulse width
0.5-25ms; step 0.1 ms
Fuel tank capacity
4700ml
Dimensions
385mm×410mm×500mm
Weight
35Kg

Joint And Turning Gland

Pipe Joint,Dredge Turning Gland,Turning Gland

Unisite Marine Engineering Inc. , http://www.nbmarineplatform.com