[ China Instrument Network Instrument Development ] Recently, the research team of Sun Dunlu, Research Institute of Heguang Institute of Hefei Research Institute of Chinese Academy of Sciences, has made a series of new research progress in the research of Er3+ doped mid-infrared laser crystal: further realized on an anti-radiation laser crystal. High power, high repetition rate 2.79 micron output; 2.71 and 2.73 micron dual wavelength polarized laser output on another crystal. Relevant research results have been published on Optics Letters, Optics Express and Optical Materials.
The 2.7–3 micron mid-infrared laser has a wide range of applications in biomedical, scientific research and atmospheric detection. In particular, high peak power and high repetition rate 2.7–3 micron lasers have attracted wide attention in the field of optoelectronic countermeasures and nonlinear optics.
Based on the previous research work, the research team further studied the laser performance of Er, Pr:GYSGG crystal by 966nm LD side pumping method. At a repetition rate of 125 Hz and a pulse width of 200 microseconds, a laser output with a maximum output power of 8.86 watts, electro-optic efficiency, and oblique efficiency of 7.7% and 14.8%, respectively, was achieved. The results show that a high performance 2.79 micron laser can be obtained by doping the deactivated ions Pr3+ and LD side pumps.
In addition, the group also implemented LD end-pumped 2710 and 2728 nm dual-wavelength polarized laser outputs on Er:YAP crystals. Through the thermal simulation analysis, laser performance and beam quality of different size Er:YAP crystal components, it is found that the proper size is beneficial to reduce the thermal lens effect of the crystal and improve the laser efficiency.
At the same time, they also used the Czochralski method to grow high optical quality Er, Pr:YAP crystals. It is found that the incorporation of the energy level coupling ion Pr3+ is beneficial to reduce the laser threshold and improve the laser efficiency. However, the doping concentration of Er3+ and Pr3+ ions still needs to be further optimized.
The research was funded by the National Natural Science Foundation and national high-tech projects.
(Original title: Anguang's research on mid-infrared Er3+ doped laser crystals has made new progress)
Working
Principles
The Rotary Granulating Machine is equipped with a set of rotary grinding
blades. It pelletizes wet materials into columned granules by stainless steel
sieves. Granules with different sizes are also available by using different
stainless steel sieves.
Applications
The rotary Granulating Machine is widely used in pharmaceutical, food,
chemical, and beverage industries. It can pelletize materials into needed
granules, and is particularly suitable for materials with high viscosity.
The granules our rotary granulating machine made are
listed as follows.
1. Aspirin granules, compound paraceli and ama-ntandine hydro chloride
capsules, antibiotics, cathartic, and kitasamycin.
2. Organic fertilizer and lithium cobalt oxide granules.
3. Chicken powder granules
Features
Our rotary granulating machine has good appearance and high granulation rate.
Its parts in direct contact with materials are made by stainless steel.
Besides, it can automatically discharge materials, which effectively avoid
granule breakage. Due to those advantages, our granulator is well accepted by
customers from the United States, Australia, Italy, Spain, Japan, Brazil and
other countries.
Rotary Granulating Machine
Pharmaceutical Granulator,Fertilizer Granulator Machine,Organic Fertilizer Granulation,Rotary Granulation Machine
Jiangsu Yutong Drying Engineering Co.,Ltd , http://www.ytdryer.com
