Model NO.: SFDP2-020-030-33
Certification: ISO9001:2008, CE, UL
Condition: New
Application Field: Industry
Voltage: 24V
Flow Rate: 7.6lpm/2.0gpm
AMPS: 3.0A Max
Pressure: 30psi/2.1bar
Port Dimension: 0.82"(20.95mm)
Diaphragm: Santoprene
Valve: EPDM/Viton
Protection: Thermal/Ignition Protection
Application: RV/Marine/Yachts/Boat/Caravan/Water System,Ect
Trademark: SEAFLO
Transport Package: Strong Carton/Poly Foam.
Specification: CE
Origin: Fujian, China
HS Code: 8413509090
Model NO.: SFDP2-020-030-33
Certification: ISO9001:2008, CE, UL
Condition: New
Application Field: Industry
Voltage: 24V
Flow Rate: 7.6lpm/2.0gpm
AMPS: 3.0A Max
Pressure: 30psi/2.1bar
Port Dimension: 0.82"(20.95mm)
Diaphragm: Santoprene
Valve: EPDM/Viton
Protection: Thermal/Ignition Protection
Application: RV/Marine/Yachts/Boat/Caravan/Water System,Ect
Trademark: SEAFLO
Transport Package: Strong Carton/Poly Foam.
Specification: CE
Origin: Fujian, China
HS Code: 8413509090
SEAFLO AC/DC high flow industrial water transfer pump7.6LPM/2.0GPM 30PSI
Description
1. Run dry without damage (Run Dry Capability)
2. Quick-connect plug-in ports for easy installation (Hose Kit Included)
3. Self-priming
4. Gnition & Thermally Protected
Specifications
How a Diaphragm Pump Works:
The pump is driven by an AC or DC moto
In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamberhas a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet
The volume of flow is determined by several factors including: The number and size of the pump chambers, cam offset, operating pressure, fluid viscosity
| Motor Voltage | 12/24V DC |
| Type | 3 chamber diaphragm pump, self priming, capable of being run dry |
| Mode | Demand or bypass |
| Certifications Option | CE Approval |
| Liquid Temperature | 140°F (60°C) Max. |
| Priming Capabilities | 6 feet (1.8 m) |
| Max Pressure | 45psi (3.1bar) |
| Max Flow rate | 11.6lpm (3.0gpm) |
| Thermal Overload Protected | Start working when temperature reach 90°C(+-10%) |
| Inlet/Outlet Ports | 10/13mm pyramid hose barb, 13mm angle hose barb, 1/2 FNPT thread filter for your choice. |
| Duty Cycle | Intermittent (under different pressure the continuous working time will also be different) |
| Motor options | 2 pin connector |
| On/off switch |
| Model | Switch | GPM/LPM | PSI/BAR | Max Draw (A) |
Valves | Diaphragm | Ports | Voltage | Wire Connections |
| SFDP1-030-045-33 | Demand | 3.0/11.6 | 45/3.1 | 8.0 | EPDM | Santoprene | 1/2"-14 MNPT | 12V | 2-Pin/Leads |
| SFDP2-030-045-33 | Demand | 3.0/11.6 | 45/3.1 | 4.0 | EPDM | Santoprene | 1/2"-14 MNPT | 24V | 2-Pin/Leads |
| SFDP1-028-040-33 | Demand | 2.8/10.0 | 45/3.1 | 8.0 | EPDM | Santoprene | 1/2"-14 MNPT | 12V | 2-Pin/Leads |
| SFDP2-028-040-33 | Demand | 2.8/10.0 | 45/3.1 | 4.0 | EPDM | Santoprene | 1/2"-14 MNPT | 24V | 2-Pin/Leads |
7.6LPM/2.0GPM 30PSI
Description
1. Run dry without damage (Run Dry Capability)
2. Quick-connect plug-in ports for easy installation (Hose Kit Included)
3. Self-priming
4. Gnition & Thermally Protected
Specifications
How a Diaphragm Pump Works:
The pump is driven by an AC or DC moto
In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamberhas a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet
The volume of flow is determined by several factors including: The number and size of the pump chambers, cam offset, operating pressure, fluid viscosity
| Motor Voltage | 12/24V DC |
| Type | 3 chamber diaphragm pump, self priming, capable of being run dry |
| Mode | Demand or bypass |
| Certifications Option | CE Approval |
| Liquid Temperature | 140°F (60°C) Max. |
| Priming Capabilities | 6 feet (1.8 m) |
| Max Pressure | 45psi (3.1bar) |
| Max Flow rate | 11.6lpm (3.0gpm) |
| Thermal Overload Protected | Start working when temperature reach 90°C(+-10%) |
| Inlet/Outlet Ports | 10/13mm pyramid hose barb, 13mm angle hose barb, 1/2 FNPT thread filter for your choice. |
| Duty Cycle | Intermittent (under different pressure the continuous working time will also be different) |
| Motor options | 2 pin connector |
| On/off switch |
| Model | Switch | GPM/LPM | PSI/BAR | Max Draw (A) |
Valves | Diaphragm | Ports | Voltage | Wire Connections |
| SFDP1-030-045-33 | Demand | 3.0/11.6 | 45/3.1 | 8.0 | EPDM | Santoprene | 1/2"-14 MNPT | 12V | 2-Pin/Leads |
| SFDP2-030-045-33 | Demand | 3.0/11.6 | 45/3.1 | 4.0 | EPDM | Santoprene | 1/2"-14 MNPT | 24V | 2-Pin/Leads |
| SFDP1-028-040-33 | Demand | 2.8/10.0 | 45/3.1 | 8.0 | EPDM | Santoprene | 1/2"-14 MNPT | 12V | 2-Pin/Leads |
| SFDP2-028-040-33 | Demand | 2.8/10.0 | 45/3.1 | 4.0 | EPDM | Santoprene | 1/2"-14 MNPT | 24V | 2-Pin/Leads |
Material
Carbon Steel like A234 WPB, 20G, A105, Q235A/B and alloy steel like ASTM A234 WP5, WP11, WP12
Executive Standard
ASME B 16.9, DIN, JIS, BS, etc
Size
1/2"-24"
Wall Thickness
SCH10~SCH160, STD, XS, XXS
Type
Seamless
Welding Method
Butt Welding
Surface Treatment
grit blasting, black or transparent painting or according to the requirement of client
Stainless Steel Cross, Carbon Steel Cross, Alloy Steel Cross, Reducer Steel Cross, Equal Steel Cross
Cangzhou Weiheng Pipe Industry Co.,Ltd , http://www.czweiheng.com