Solar energy fountain is to use solar energy to drive the pump for pumping water landscape fountain device. Using this product, solar panels and model brushless pumps, with fast start-up, high efficiency, advantages of strong stability. In addition, the product does not need an external power supply, not only has the advantages of convenient installation, using is simple, safe and reliable, energy saving and environmental protection. Products are widely used in fountain, rockery fountain, fish tank water recycling ,pond and other places.
We have various modesl for your choice:
Data Sheet:
Â
| Solar panel | 7V/1.4W , MONO |
| Solar panel diameter | 160mm |
| Max pump flow | 160L/H |
| Water flow height | 30-50CM |
| Pump power | 1.1W |
| Spray head | 4 kinds |
| QTY/CTN | 40pcs |
| Package G.W | 0.3KG |
| Carton G.W | 12KG |
| Gift box size | 170*165*36MM |
| Carton size | 380*355*350MMÂ |
Product Feature:
1. Solar powered, without battery.
1. The pump can work continuously when the sunlight is enough, its work effiency depends on the level of sunlight.
2. Don't make the pump work without water for a long time, or its lifespan will be shortened.
3. Clean the pump regularly to avoid it stop working.
4. Be careful when using it. And don't let children play with it.
Â
★Change a small sprayer head to lower the water flow height.
★Secure the pump on the center of the birdbath via sucker and line(included) to avoid pump floats to the edge of birdbath and spray out water.
★Shade some solar panel to influence solar power absorption efficiency(the less solar energy, the lower water flow).
Packgaing&Delivery:
Â
Working Principle
Chenwei Series Vibration Polishing Machine has a ring chamber to hold media (abrasive stones) and work pieces.When the machine start working,it makes three-D high frequency vibration.This motion makes the media work on surface of work pieces upward &downward;leftward and rightward;frontward and backward.The process is similar to handwork of surface polishing.
The grinding stones are rolling forward and they are grinding each other during .this makes the work pieces ,polished and clean.
To replace the traditional cloth-wheel polishing, the Vibratory Finishing Machine for Metal Working can save a lot of spending on manpower, and lower the cost of production. It can also be matched up with mass production, improve and stabilize the quality of the products.
The machine structure
Vibratory Polish machine is composed of inertial vibrator, vessel, electrical cabinet and basement.
Inertial vibrator: This is the vibrating source of the machine, it is composed Of vibratory motor, springs and eccentric blocks.
Vessel: The vessel is welded of annular steel plate. It is lined with high quality wearable Polyurethane, to weaken the noise and the bump of workpieces on vessel. (For CWP series, there is a separator on the vessel to seperate the workpieces from the stones. )
Electrical cabinet: Operate the machine by buttons on the control panel.
Basement: It is weld of steel, and it has springs to hold the vessel
Polishing Machine
Polishing Machine,Car Polishing Machine,Wheel or Polishing Machine,Car Alloy Wheel
XINXIANG CHENWEI MACHINERY CO.,LTD , https://www.sieves.nl