FEATURE
The WF-4A is a 220V high-pressure car washer that offers an advanced alternative to traditional piston washers. It utilizes vortex power and an intelligent control system, allowing it to clean a vehicle at 4-6 washing positions simultaneously. This model stands out for its durability, low failure rate, and resistance to distance and water quality variations.
Its noise level is under 50dB, making it oil-less and quiet during operation. The working station pressure is evenly distributed, with a maximum water pressure of 1.1MPa. When the washing gun is opened, the motor automatically pressurizes, and when closed, it automatically stops. With a bottom spraying system, it effectively removes sand from the car chassis.
Â
ATTENTION
1. The machine operates on 220V with a power consumption of 2.2kW. Ensure proper installation and connection to the power supply. Pay attention to the correct rotation direction of the motor during setup.
2. The machine supports up to 4 washing guns. Adding a bottom spraying cleaning system allows it to wash the car chassis simultaneously.
3. The use of vortex power enhances water flow speed and creates strong impact force. The discharge water reaches high pressure, with a maximum of 1.1MPa or 11kg.
4. It is recommended to use metal or PPR pipes. The inner diameter should not be less than 32mm; otherwise, it may affect the discharge pressure.
5. Each washing gun has a water flow rate of 3-3.5L/min.
6. To extend the motor's lifespan, avoid frequently opening and closing the washing gun, as this can cause unnecessary motor starts.
7. The machine is equipped with built-in protection against leakage, overheating, overvoltage, phase loss, and voltage instability. If the machine fails to start, it may be due to low voltage. A voltage stabilizer is recommended.
8. Due to its low noise level (under 50dB), an alarm is installed on top of the machine to remind workers to turn off the main power supply.
9. The main unit and intelligent system are covered by an 18-month warranty, while the motor has a 1-year warranty. Pipes and washing guns are not included in the warranty coverage.
Engine oil packaging tubes are cylindrical containers that are specifically designed to store and transport engine oil. These tubes are typically made of high-density polyethylene (HDPE) or polypropylene (PP) plastic, which is known for its durability and resistance to chemicals and moisture.
The tubes are available in various sizes and shapes, depending on the volume of oil they are intended to store. Some tubes come with a screw-on cap or a snap-on lid to prevent spills and leaks, while others have a flip-top cap or a pump dispenser for easy pouring.
Engine oil packaging tubes are commonly used by automotive manufacturers, oil companies, and retailers to package and sell engine oil to consumers. They are also used by individuals who want to store and transport engine oil for personal use.
The benefits of using engine oil packaging tubes include:
1. Protection: The tubes provide a protective barrier against moisture, dust, and other contaminants that can compromise the quality of the oil.
2. Convenience: The tubes are easy to carry and store, making them ideal for use in vehicles, boats, and other mobile applications.
3. Sustainability: The tubes are recyclable and can be reused multiple times, reducing waste and promoting environmental sustainability.
Overall, engine oil packaging tubes provide a convenient and reliable way to store and transport engine oil, ensuring that it remains clean and free from contaminants until it is ready to be used.
Engine Oil Packaging Tube,Oil Packaging Tube,Custom Oil Packaging Tube,Lube Oil Packaging
Suzhou Sanxin Tube Co.,Ltd. , https://www.packagingest.com