FEATURES
The WF-4A is a 220V high-pressure car washer that stands out from traditional piston models by using vortex power and an intelligent control system. It can clean cars at 4 to 6 washing positions simultaneously, making it highly efficient for commercial use. One of its main advantages is durability, with low failure rates and resistance to distance and water quality issues. The machine operates quietly, producing less than 50dB of noise and being oilless, which makes it ideal for indoor or residential settings. Its working station pressure is consistent, with a maximum water pressure of 1.1MPa. The washing gun motor automatically pressurizes when opened and closes when shut. Additionally, the bottom spraying feature allows for effective cleaning of sand and debris from the car chassis.
NOTES FOR USE
1. The machine operates on 220V with a power rating of 2.2kW. Ensure proper installation according to the instructions, and pay attention to the correct rotation direction of the motor during setup.
2. The machine supports up to 4 washing guns. With the addition of a bottom spraying system, it can also clean the car chassis effectively.
3. The machine uses vortex power to increase water flow speed and generate impact force. The discharge water reaches high pressure, with a maximum pressure of 1.1MPa or 11kg/cm².
4. Use metal or PPR pipes for connections. The inner diameter should not be less than 32mm, as smaller diameters may reduce the discharge pressure.
5. Each washing gun has a water flow rate of 3-3.5L/min.
6. Avoid frequently opening and closing the washing gun to minimize motor start-ups, which can shorten the motor’s lifespan.
7. The machine is equipped with built-in protection devices against leakage, overheating, overvoltage, phase loss, and voltage instability. If the machine fails to start, it might be due to low voltage. In such cases, a voltage stabilizer is recommended.
8. Due to its low noise level (under 50dB), an alarm is installed on top of the machine to remind workers to turn off the main power supply when not in use.
9. The warranty period for the main unit and intelligent system is 18 months, while the motor is covered for 1 year. Pipes and washing guns are not included in the warranty coverage.
Antibacterial Wound Gel Packaging
Antibacterial wound gel packaging should be designed to protect the product from contamination and maintain its effectiveness. TOur tube packaging as below advantages:
Here are some key features that can be included in the packaging design:
1. Tamper-evident seal: A tamper-evident seal ensures that the product has not been opened or used before purchase. This helps to maintain the integrity of the product and prevent contamination.
2. Air-tight container: An air-tight container prevents exposure to air and moisture, which can degrade the effectiveness of the antibacterial agents in the gel.
3. Clear instructions: Clear and concise instructions for application should be included on the packaging. This can include information on how much gel to apply, how often to apply it, and any precautions or warnings.
4. Easy-to-use dispenser: The packaging should include an easy-to-use dispenser that allows for precise application of the gel without introducing additional contamination.
5. Portable and convenient: The packaging should be designed to be portable and convenient for use on-the-go. This can include a compact size and lightweight materials.
Overall, the packaging design should prioritize the protection and effectiveness of the antibacterial wound gel, while also providing a user-friendly experience for consumers.
Antibacterial Wound Gel Packaging,Ointment Tube,Gel Tube,Wound Gel Packaging
Suzhou Sanxin Tube Co.,Ltd. , https://www.packagingest.com