Model NO.: 310, 460, 520, etc
HS Code: 84552290
Model NO.: 310, 460, 520, etc
HS Code: 84552290
Fully Automatic Transformer Panel Radiator Production LineGeneral
Transformer radiator fin forming & welding line, full automatic, automatic feeding, rolling, punching, overturning for joining, multi spot welding, side seaming welding, terminal seam welding, side trimming, terminal cutting.
One line can produce four size radiator panel: 310mm, 480mm, 520mm, 535mm.
Length of radiator panel: 500~4000mm.
Rolling speed: 2~6m/min (if full automatic, line speed 1.5m/min)
PLC control, full automatic
Work flow
Decoiling- roll forming -hydraulic press-turn over table for two pieces joining -multiple spot welding- side seam welding- head welding -side shearing -head cutting -end product
Main Specification
| Item | Data | |
| Standard panel size | 310mm, 320mm, 460mm, 480mm, 520mm, 535mm, etc | |
| Panel length | 500-4000mm | |
| Length tolerance | ±1.0mm | |
| Panel bearing pressure | Positive pressure≥ 0.15Mpa, negative pressure ≥ 133Kpa, without deformation | |
| Panel material | ST12, SPCC, DC01 cold rolled steel, 1.0-1.2mm | |
| Total power | Approx 315KW | |
| Total line dimension | 46.5m X 3.5m | |
| Oil fluits size | Steel thickness 1.0mm | ≥ 11mm |
| Steel thickness 1.2mm | ≥ 11.5mm | |
| Number of oil fluits | Panel 310mm, 320mm | 3 |
| Panel 460mm, 480mm | 5 | |
| Panel 520mm, 535mm | 6 | |
| Input coil width | Panel 310mm | 325mm |
| Panel 460mm | 475mm | |
| Panel 520mm | 535mm | |
Machine photos
 Fully Automatic Transformer Panel Radiator Production Line
General
Transformer radiator fin forming & welding line, full automatic, automatic feeding, rolling, punching, overturning for joining, multi spot welding, side seaming welding, terminal seam welding, side trimming, terminal cutting.
One line can produce four size radiator panel: 310mm, 480mm, 520mm, 535mm.
Length of radiator panel: 500~4000mm.
Rolling speed: 2~6m/min (if full automatic, line speed 1.5m/min)
PLC control, full automatic
Work flow
Decoiling- roll forming -hydraulic press-turn over table for two pieces joining -multiple spot welding- side seam welding- head welding -side shearing -head cutting -end product
Main Specification
| Item | Data | |
| Standard panel size | 310mm, 320mm, 460mm, 480mm, 520mm, 535mm, etc | |
| Panel length | 500-4000mm | |
| Length tolerance | ±1.0mm | |
| Panel bearing pressure | Positive pressure≥ 0.15Mpa, negative pressure ≥ 133Kpa, without deformation | |
| Panel material | ST12, SPCC, DC01 cold rolled steel, 1.0-1.2mm | |
| Total power | Approx 315KW | |
| Total line dimension | 46.5m X 3.5m | |
| Oil fluits size | Steel thickness 1.0mm | ≥ 11mm |
| Steel thickness 1.2mm | ≥ 11.5mm | |
| Number of oil fluits | Panel 310mm, 320mm | 3 |
| Panel 460mm, 480mm | 5 | |
| Panel 520mm, 535mm | 6 | |
| Input coil width | Panel 310mm | 325mm |
| Panel 460mm | 475mm | |
| Panel 520mm | 535mm | |
Machine photos
Â
Linear Actuator For Kitchen hood Lift
Electric Linear Actuator 12V,Kitchen Hood Lift Actuator,Kitchen Ventilator Lift Actuator,Linear Actuator For Kitchen Hood Lift
ZHEJIANG XINYI INTELLIGENT DRIVE TECHNOLOGY CO.,LTD , https://www.xinyiactuators.com