High Pressure Cryogenic Centrifugal Piston Pump for Water Well Drilling

Model NO.: BPO-200-600
Model NO.: BPO-200-600
"BPO-200-600

Liquid Oxygen/Nitrogen/Argon pump Model: BPO-200- 600/16.5, Working pressure: 165 bar, Capacity: 200-600L/h,  5.5Kw 380V@ 50Hz, Brand- new
 
LNG IMMERSED PUMP SKID
Working medium           LNG
Inlet pressure           0.02~1.2MPa
Lift                     250m
Filling quantity         20~40m³/h
LNG LIQUID PUMP PRYING
LNG PUMP SKID
Working medium           LO2  LN2  LAr LCO2  LNG  
Working pressure         2~20MPa
Gas supply capacity      100~5000Nm³/h
LNG HIGH PRESSURE BOOSTING VAPORIZER SKID
Working medium           LNG
Working pressure         20~70MPa
Gas supply capacity      50~10000Nm³/h

High Pressure Cryogenic Centrifugal Piston Pump for Water Well Drilling
  "BPO-200-600

Liquid Oxygen/Nitrogen/Argon pump Model: BPO-200- 600/16.5, Working pressure: 165 bar, Capacity: 200-600L/h,  5.5Kw 380V@ 50Hz, Brand- new
 
LNG IMMERSED PUMP SKID
Working medium           LNG
Inlet pressure           0.02~1.2MPa
Lift                     250m
Filling quantity         20~40m³/h
LNG LIQUID PUMP PRYING
LNG PUMP SKID
Working medium           LO2  LN2  LAr LCO2  LNG  
Working pressure         2~20MPa
Gas supply capacity      100~5000Nm³/h
LNG HIGH PRESSURE BOOSTING VAPORIZER SKID
Working medium           LNG
Working pressure         20~70MPa
Gas supply capacity      50~10000Nm³/h

High Pressure Cryogenic Centrifugal Piston Pump for Water Well Drilling
 


The internal structural design is vane, Vane Damper is  more suitable for soft close. ABD vane dampers are used to dampen drives, control speed, and many other applications. The damping direction of the vane dampers with continuous rotation can be clockwise, counter clockwise, or in both directions. Vane dampers are widely used in automobile interior decoration, household electric appliances, furniture and bathroom products, etc. Our dampers can make the movement of structures soft, quiet and safe to mitigate the impact, avoid the damage, increase the mechanical life, reduce noise, and improve product quality.


When the axis of rotation is moving, the blades that are connected to the axis of rotation rotate at the same time. The silicone oil in the oil chamber is squeezed between the blade andthe body to the back of the blade. The resistance formed by the pressure of the silicone oil to the area of the blade is the damping torque of the rotating shaft and the blade. The torque generated during rotation is determined by the oil viscosity, the pressure area of the blade and the clearance between the blade and the body.
Vane Damper



NOTE:

1. Please contact the corresponding product engineer for specific torque products.

2.The Standard of completion closing:the angle is 90° between Shaft A and Shaft B.

3.It is closing position to assemble the shaft into the housing.

4. Max. cycle rate: 3 cycles/min(Clockwise110 °, 110 ° anti-clockwise for 1 cycle)

5.Operating temperature:0~40℃

6.Storage temperature:-10~60℃



Vane Damper Characteristics

Soft closing time test: Measure the closing time from angle 70 to 0.

Rated Torque (T).

Test Temperature: 23±2℃.

Durability test:

Test Method: From the closing position to opening position, push back to 70°, soft close from 70° to 0°.

Rated Torque (T).

Operation Angle: 0°~110°.

Test Temperature: 23±2℃.

Durability test cycle: 50,000 cycles. The result of product test )>2s.

 

 

Vane Damper

Vane Damper,High Temperature Dampers,Toilet Seat Vane Damper,Soft Down Damper,Storage Boxes Vane Damper

Shenzhen ABD Equipment Co., Ltd. , https://www.abddamper.com

This entry was posted in on