As we all know, wiper blades are consumables, hot heat, frequent rainfall, will affect the life of car wipers, while the car's front windshield sight good or bad is a matter of safety, whether the rain wiper in a rainy day can effectively remove the rain on the glass, to It is important that drivers provide a bright vision. Therefore, it is necessary to strengthen the inspection and maintenance of wipers.
Care instructions
1. When using a wiper to remove the dust on the surface of the windshield during sunny days, be sure to spray glass water and do not dry it.
2. There are other stubborn and hard dirt on the glass that should be cleaned by hand. These things are very easy to hurt the wiper blade, causing the wiper to be dirty. In severe cases, the wiper motor can also be affected.
3. When the car wash and daily cleaning need to lift the wiper blade, it is necessary to hold the back of the wiper blade and gently return it when it is released. Do not bounce the wiper blade back.
4. When using in winter, you should use ice shovel to clear the hail on the surface of the windshield so as not to increase the burden of the wiper.
5. If the dirt on the wiper is difficult to clean or the wiper itself has problems, it is best to seek professional repairs as soon as possible.
Regular cleaning
If you live in a northern city, some fine grains of sand are sandwiched between the wiper and the windshield on weekdays. Failure to clean them in time will increase the wear of the wiper. Therefore, if you want to extend the life of the wiper, you must do a good job of cleaning. The correct method is to lift the wiper when washing the car or washing the wiper, flush it with the direction of the strip, and use a lighter weight.
Do not rub
Many people think that any stain on the windshield can be removed with a wiper. In fact, this misunderstanding is the main reason that wipers are easily damaged. Usually, when a car runs at a high speed, the body of sand or small flying insects will be stained on the windshield. Some owners use a wiper to wipe it directly for convenience. This will not only leave dirt on it, but also reduce the service life. Wipers are more vulnerable to damage.
Keep away from ammonia
Ammonia is the killer that causes edge hardening. Generally, domestic household laundry soap or other household cleaning products contain ammonia. Therefore, it is recommended that vehicle owners clean the vehicle on weekdays and try to choose a special cleaner for cars. Another important detail to remind is that different cleaners should never be mixed. This is likely to produce chemicals that corrode the wiper rubber and inadvertently cause damage to the wiper.
Maintaining a car is a meticulous and meticulous task that requires all aspects to enable the car to give us the best driving experience.
Avoiding high temperatures
The strong high temperature easily causes the rubber to soften and deform. In the long run, it will cause great damage to the material, resulting in deformation or loss of elasticity. Therefore, we must try our best to avoid the car under the hot sun. In addition, remember to keep the wipers upright after each stop. This will effectively prevent the wipers from sticking to the glass.
Aluminum castings are lightweight and able to withstand the highest operating temperatures of all die cast alloys.
Aluminum Alloy Characteristics:
- High operating temperatures
- Outstanding corrosion resistance
- Lightweight
- Very good strength and hardness
- Good stiffness and strength-to-weight ratio
- Excellent EMI and RFI shielding properties
- Excellent thermal conductivity
- High electrical conductivity
- Good finishing characteristics
- Fully recyclability
Aluminum's strength, corrosion resistance, and heat dissipating properties offer mechanical designers significant advantages. And our proprietary Thin Wall Aluminum Technology has made aluminum die casting an option for even more applications.
Aluminum Alloy Casting,Aluminum Precision Casting,Aluminum Alloy Die Casting Parts,Aluminum Alloy Die Casting
HSI INDUSTRIEL LTD , http://www.hsiindustriel.com