Electromagnetic pulse valve is submerged pulse valve, the angle between the import and export of 90 degrees, it applies to the installation of dust and gas injection tube pipe installation, smooth flow, to meet the requirements of the pulse of clean air. The electromagnetic pulse valve is the compressed air "switch" of the pulse bag dust remover cleaning and blowing system. Controlled by pulse injection controller output signals, the Filter bag by row (room) blowing cleaning, the resistance of the precipitator to keep within the set range, in order to ensure the capacity of the precipitator and dust collection efficiency. Submerged pulse valve works: SF-Z (DSF-Z) -type electromagnetic pulse valve submerged valve, the angle between the import and export of 90 °, suitable for installation of the gas bag and dust collector injection pipe connection. The electrical signal of the pulse injection controller makes the electromagnetic pulse valve armature move backward, the air vent of the air chamber of the valve is opened, the air chamber is rapidly decompressed, the diaphragm assembly is moved backward, the compressed air is injected through the valve outlet, the electromagnetic pulse valve is in "On" state. Pulse electric pulse controller disappears, the electromagnetic pulse valve armature reset, after the gas chamber vent closed, after the gas chamber pressure so that the diaphragm assembly close to the valve output, the electromagnetic pulse valve is in a "closed" state. The electromagnetic pulse valve is the compressed air "switch" of the pulse bag dust remover cleaning and blowing system. Controlled by pulse injection controller output signals, the filter bag by row (room) blowing cleaning, the resistance of the precipitator to keep within the set range, in order to ensure the capacity of the precipitator and dust collection efficiency. Smooth flow, can provide the required cleaning gas pulse. Diaphragm to the electromagnetic pulse valve is divided into the front and rear two gas chamber, when connected to the compressed air, the compressed air through the throttle into the back air chamber, then the gas chamber pressure diaphragm assembly close to the valve outlet, The electromagnetic pulse valve is in the "off" state. Submerged pulse valve works: TMF-T (DFM-T) electromagnetic pulse valve for the straight-through electromagnetic pulse valve, the angle between the import and export of 180 °, usually with the gas box pulse bag filter supporting. The electrical signal of the pulse injection controller makes the electromagnetic pulse valve armature move backward, the air vent of the air chamber of the valve is opened, the air chamber is rapidly decompressed, the diaphragm assembly is moved backward, the compressed air is injected through the valve outlet, the electromagnetic pulse valve is in "On" state. Pulse electric pulse controller disappears, the electromagnetic pulse valve armature reset, after the gas chamber vent closed, after the gas chamber pressure so that the diaphragm assembly close to the valve output, the electromagnetic pulse valve is in a "closed" state. Diaphragm to the electromagnetic pulse valve is divided into the front and rear two gas chamber, when connected to the compressed air, the compressed air through the throttle into the back air chamber, then the gas chamber pressure diaphragm assembly close to the valve outlet, The electromagnetic pulse valve is in the "off" state. This article Keywords: valve
1. Different kinds of knife heads for different makes of combine harvesters, swather,lawn mower, like John Deere, New Holland, Claas,Case and MF.
2. According to different working condition, forged, machined and casting quality is available.
3. Ordered according to customers' requirements,based on the sample or drawing
4. Special mould development.
5. Popular models AH121075, AH89498, AZ50341, 059509P1 and so on.
6. Application:200-900 Comb.
Combine Harvester Knife Head, Knife Bar Head, Combine Knife Head, Combine Ball Joint
Ningbo Combine Machinery Co.,Ltd. , https://www.combine-harvester-parts.com