On November 29th, the third stop of the 150th Anniversary of Chang’an Automobile and the completion of the new base of the Chang’an European Design Center was held in Rivoli, Turin Province, Italy. Liu Bo, Vice President of Chang’an Automobile, attended the event. The Consul-General of the Chinese Consulate General in Milan Liang Hui and Mayor Deliver of Rivoli. Netac attended the ceremony and delivered a speech. Liu Bo said in his speech that this year marks the 150th anniversary of the birth of Chang’an. In the historical transition that spans three centuries, it has written performance worthy of history and times. The first Chinese jeep was born in Chang’an, China’s first hybrid car. It has mass-produced in Chang'an and broke through 10 million production and sales in the shortest time. At present, Changan Auto’s independent research and development strength ranks first in the Chinese auto industry, and Chang’an’s own-brand auto sales rank first in China for six consecutive years. Today, the Chang'an European Design Center has moved to its new site. Chang’an has taken a firm footing in its “going global†strategy with a global vision and open mindedness. In the future development process, through the use of European advanced automotive design concepts and technologies, it will certainly improve the design capabilities of Changan Automobile.
Liang Hui said in his speech that Changan Automobile is an important automobile manufacturer in China and has a long history and leading automotive R&D and manufacturing capabilities in China. In recent years, under the background of the rapid development of the Chinese automotive industry through joint ventures and cooperation, Changan Automobile has accurately grasped the opportunity, adhered to the road of independent innovation, and positioned itself in the direction of international development, boldly stepping out of the country and Italy as the world’s automotive design and manufacturing. In a short span of 10 years, the cooperation between the strong countries has grown from its initial representative office into a European design center with comprehensive automotive modeling and development capabilities. The pace of its development has been steady and powerful, and the achievements have been encouraging.
Desi Franco said that the completion of the new base of the Chang'an European Design Center has led to the development of local employment, skills, experience and creativity, which will help improve the industrial conditions of the city. In the future development, the City of Rivoli will prepare It is good for Changan to serve and establish a mutually beneficial cooperation system with Changan.
The new base of the Chang'an European Design Center is a permanent base covering an area of ​​11,000 square meters and employs more than 100 people. Currently, it has a number of capabilities including general layout design, creative design, digital design, soft stearin model making, and model post-processing. , covering the entire process of car styling design, with six model production platform, woodworking machine plus room, spray paint and other ancillary facilities.
The guests who participated in the event were members of the political department of Piedmont, Kobayow. Consultant Mano, Fabrec, Turin Province. Mark, Mayor of Fasno, Turin. Pirlo, Torino International Relations Ambassador Gilardino. Franco, Consul General of China in Milan Su and Counsellor, Pan Consul. Zhongli Chamber of Commerce Foundation General Manager Louise. Ahmad, as well as local partner companies and brothers.
1. The cutting speed of the board divider can be set to high or low.
2. Maximum travel of knife wheel: 600mm.
3. Knife wheel micro-adjustment: 0-2mm.
4. Adjustable lower board knife: 0-50mm.5. Backstop depth adjustable range: 0-150mm, maximum PCB board cutting width: 150mm, maximum PCB board cutting length: 400mm
6. Thickness: 0.2-3.2mm, maximum thickness between V-slots: 0.25-2.0mm
7. Connecting multiple pieces of PCB board in the solder, folding often hurt the line, or will be broken electronic parts, the use of the board splitter can avoid damage, and can improve efficiency and quality.
8. With the walking knife type board splitting machine to divide, can completely reduce the stress, to prevent the cracking of solder joints and parts breakage.
9. Using the upper circular knife under the flat knife method, PCB board to the board splitting machine under the flat knife, switch a step, the upper circular knife moving across to the set point, the PCB board will be cut off and divided, cut off without stripping, the cut is flat.
10. Slitter knife travel can be set at will with the length of the PCB board forward stopping fixed point, stopping fixed point for 0-100-200-300-400mm.
11. Cutter back with cut-off length stopper, according to the different width of the PCB board to do the adjustment, for no V-CUT slot PCB board can also easily cut the board, accurate not oblique cut.
12. Can fine-tune the thickness of various PCB boards, to solve the problem of PCB board V-CUT slot depth.
PCB separator,PCB cutting machine,V-cut pcb separator,V-cut pcb machine
SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.singsunautomatics.com