During the operation of the equipment, the on-site operation workers should perform the following inspections before the equipment is working. The following are common daily inspections of equipment:
1. Carry out routine inspection work on the cable of the equipment, whether there is cracking or damage.
2. Whether the components of the connected equipment are lost or damaged
3. Check for foreign objects between the equipment, and large particles cause certain damage to the equipment.
4. Check if the drum of the equipment can rotate freely.
5. Whether the hydraulic oil is in place, can you finish the daily lubrication work of the equipment?
6. The wiring phase of the equipment motor is correct to ensure normal operation. If there is any abnormality, it should be shut down immediately to correct the normal phase connection.
Acrylic sheet has the reputation of "plastic crystal", And has excellent weather ability, especially used in outdoor, not because of years of weathered, and yellow, and the phenomenon of hydrolysis, the other plastics, and have good surface hardness and gloss, machining plasticity is big, can be made into various shapes and you need products, strong resistance to impact, 16 times as the common glass, suitable for installation in special need security zone, The high recovery rate is recognized by the increasing environmental awareness. Our main production thickness of 20-200mm acrylic one-time casting board, also can produce acrylic superimposed board, superimposed thickness can reach 800mm, can accept customization, acrylic board using Lucite monomer production, transparency can reach more than 92%, the maximum specification of acrylic board is 9000×3000mm, the minimum size is 1600×2600mm. 
Acrylic Sheet,Acrylic Glass,Acrylic Board,Acrylic Panels
Jiangsu Jinsui Acrylic Technology Co., LTD , https://www.jinsuiacrylic.com