Hujia bear market structure is difficult to get a fundamental twist

In October 2015, the Hujiao 1601 contract fell by 4.34%, and it has closed the Yinxian for four consecutive months. The Hujia bear market is still continuing. Although the tire companies started to improve slightly in the short term, due to the weak macroeconomic environment, the downstream demand in the long term is still insufficient. At the same time, after entering November, foreign natural rubber production areas will enter the rubber production season, and the market supply is expected to increase again. In this case, the Hujia bear market structure is difficult to get a fundamental turn.

Tire production and sales are not optimistic

Judging from the latest economic data, economic growth is still weaker than expected. China’s GDP in the third quarter was only 6.9%, and it continued to fall. There was no sign of stabilizing, indicating that both consumption and investment were in contraction. This is in contrast to the previous market's expectation that “the economy will stabilize after sustained monetary easing” and confidence in the market will be hit harder.

Affected by the poor economic environment, the production and sales of the tire industry is not optimistic. National Bureau of Statistics data show that in September, China's production of tire tires was 77.58 million, a year-on-year decrease of 4.94%, which was further expanded compared with August. It is worth noting that September was the peak season for the production of tires. During this period, the output fell sharply, indicating that the downstream demand has not improved but it has further deteriorated. It is understood that after the National Day holiday, the operating rate of tire companies in Shandong increased to 66.44%, but the sales situation is not good; at the end of October, the operating rate of tire enterprises in Shandong fell again. The author predicts that with the end of the consumer season in November, the operating rate of tire companies will hardly have room for improvement.

Natural rubber supply is expected to increase

Since November, natural rubber production areas in China and abroad have ushered in the peak season for rubber production, so there is an increase in the expected supply of natural rubber. From the perspective of domestic supply, China's natural rubber imports continue to increase. According to data from the General Administration of Customs, in September, China’s imports of natural rubber were 297,266 tons, a 12% increase from the previous month; imports of synthetic rubber were 165,666 tons, an increase of 19% compared with the previous month and an increase of 30% year-on-year. Excluding natural rubber instead of composite rubber imports, the total natural rubber imports also increased by more than 30%. As the Thai Ministry of Agriculture and the Sinochem Corporation recently signed a 200,000-ton natural rubber import agreement, it is expected that the import level will remain high in November, and the supply of domestic natural rubber will continue to increase.

Natural rubber stocks keep rising

The increase in imports led to a rapid rebound in domestic rubber stocks after bottoming out in July. At present, the natural rubber stocks in Qingdao Bonded Area continue to maintain a net inflow, according to statistics, from August to October, rubber stocks in Qingdao Free Trade Zone continued to rise. As of the end of October, rubber stocks in Qingdao Free Trade Zone increased to 204,500 tons, an increase of 12.6% from the end of September, again reaching the year's high. This pressure on the price of the latter Hujiao is self-evident.

On the whole, the Hujia bear market structure is difficult to fundamentally change, short-term oversold may appear after a certain technical rebound, but can not change the overall trend of weaker prices, Hujiao under 12,000 yuan / ton under pressure. Therefore, in terms of operational strategy, investors need to maintain the idea of ​​a rebound and short, and be cautious about the operation of bottling.

Oilseed Solvent Extraction Plant

Solvent extraction is a process to extract the oil from oil bearing materials by means of a solvent. A typical solvent used is hexane, a by-product of petroleum. The solvent extraction plant is designed to extract oil directly from oil seeds containing less than 20% oil, like soybeans, after flaking. Or it extracts oils from pre-pressed or fully pressed cake of seeds containing more than 20% oil like sunflowers, peanuts, cotton seed, palm kernels, canola, copra, castor and a variety of other materials.
The purpose of solvent plant extraction is to remove most of the oil contained in the seed. Extraction is conducted on prepared seeds or, as generally occurs in the case of high oil content seeds, the cake obtained from pre-pressing. Solvent extraction consists of a sequence of five operations:
Preparation of seeds for extraction which includes pre-pressing for high oil content seeds.
Extraction of oil from the prepared material with the aid of a food-grade solvent.
Desolventising-toasting of the de-oiled seed/meal, often combined with drying and cooling of the said meal.
Distillation, to remove the solvent from the extracted oil.
Recovery of solvent, which is reused again and again at the extractor level.


Simple in structure with stable performance;
Additional horizontal grid plate prevents the miscella from flowing back into the material cell to ensure the best extraction effect;
The wet meal is discharged by the material discharger which continuously discharges the wet meal onto the wet meal conveyor. This avoids meal bridging, un-uniform wet meal discharging and extends the serviceable life of the wet meal conveyor.
Composed of pre-extraction, extraction and draining sections. There is material turnover in the process of extraction to make the extraction uniform and thorough. Special self-cell solvent spraying ensures the best effect during extraction.
Features of the Solvent Extraction Process

Evaporation takes place in a vacuum for the best oil quality.
Extraction system can process different raw materials.
Solvent recovery system from vent gas is particularly absorbent.
With full energy conservation and repeat utilization, steam consumption is markedly reduced.
Solvent Extraction Plants Supplied by Yongsheng

In order to meet different clients` requirements, we have a wide range of equipment with capacities from 300 kg to 100 metric tons. When refined, oil grades may qualify as Grade 1, Grade 2, Grade 3 or Grade 4. There are two technologies: one is batch, the other is continuous. Normally we adopt batch-type processing for capacities less than 20 t/d. Otherwise the process adopted is semi-continuous or continuous.

We continue to research new equipment. Yongsheng develops equipment designed to be fully automatic, utilizing advanced technology that can be combined according to different clients` requirements. The latest refining equipment consists of many single units and has a self-contained heating system which saves energy since it does not use a boiler. This equipment requires a smaller workspace and costs less. Furthermore, it has a wider range of functions and can be used to produce Grade 1, Grade 2, Grade 3 and Grade 4 oil.

Soybean Oil Solvent Extraction Turnkey Project,Palm Oil Solvent Extraction Turnkey Project,Sunflower Oil Solvent Extraction Turnkey Project,Plant Oil Solvent Extraction Turnkey Project

Hebei Huipin Machinery Co.,LTD , https://www.oilpresschina.com

This entry was posted in on