[China Instrument Network Policy and Regulations] On January 16, the State Grid Corporation of China 2016 working meeting was held. It was learned from the meeting that, in 2015, the State Grid Corporation of China’s power grid investment reached 452.1 billion yuan, a year-on-year increase of 17.1%, a record high. The following Xiaobian arranges the 2016 annual work plan.
State Grid Corporation plans to invest 439 billion yuan in 2016 power grid construction plan
In 2016, the State Grid plans to start a line with 110 (66) kV and above lines of 76,000 kilometers, and convert power (commutation) capacity to 550 million kVA (kW). It has put into operation 47,000 km of 110 (66) kV and above lines, and has a capacity of 310 million kVA (kW) for substation (commutation).
"Thirteenth Five-Year Plan" will accelerate the construction of China's energy
By 2020, China National Grid will strive to realize a grid-connected renewable energy capacity of 570 million kilowatts, accounting for 35% of the total installed capacity; non-fossil energy sources will increase the proportion of primary energy consumption to 15.5%; eastern and central China will receive 310 million kilowatts of electricity, including clean energy. It accounts for 50%; it consumes 2.2 trillion kilowatt-hours of clean electricity every year, reducing carbon dioxide emissions by 1.78 billion tons, sulfur dioxide by 880,000 tons, and nitrogen oxides by 880,000 tons.
UHV power grid construction
According to the plan of the State Grid Corporation of China, the UHV power grid will be completed in the east and west synchronous power grids by 2020, and 19 DC projects will be put into operation. The overall structure of the transmission and receiving ends will be clear, and the backbone grids with coordinated development of AC and DC will be formed. The capacity of electricity (commutation) reached 95,000 kilometers and 890 million kVA (kW) respectively. The distribution network shall follow the principles of unified planning, unified standards, safety and reliability, and advanced and applicable principles, optimize the network structure, simplify the types of equipment, increase investment efficiency, enhance the level of intelligence, and effectively solve the outstanding problems of limited power supply capacity and lower power quality. The rapid development of electric vehicles, a large number of distributed power supply access and diversified customer service requirements. The power grids at all levels must plan and coordinate development, optimize the structure of 500 kV power grids in each region, and strengthen the construction of the main 750 kV grid in the northwest to achieve safe, economical, and efficient operation.
Promotion of water, electricity, gas and heat
Distribution network and smart grid construction will usher in a new upsurge. In 2016, the State Grid Corporation of China proposed to speed up the upgrading and upgrading of rural power grids and effectively solve the problems of low voltage, stuck neck, and insufficient power supply in rural power grids. In the first half of the year, it was required to fully complete the 2015 national new rural project of the Ministry of Agriculture, and to complete the addition of seven provincial (municipal) rural power grids and urban distribution network projects during the year. Launched a number of smart distribution network demonstration projects to strengthen the upgrading of old metering devices, installed 60.58 million smart energy meters, and promoted the collection of water, electricity, gas and heat.
State Grid Corporation plans to invest 439 billion yuan in 2016 power grid construction plan
In 2016, the State Grid plans to start a line with 110 (66) kV and above lines of 76,000 kilometers, and convert power (commutation) capacity to 550 million kVA (kW). It has put into operation 47,000 km of 110 (66) kV and above lines, and has a capacity of 310 million kVA (kW) for substation (commutation).
"Thirteenth Five-Year Plan" will accelerate the construction of China's energy
By 2020, China National Grid will strive to realize a grid-connected renewable energy capacity of 570 million kilowatts, accounting for 35% of the total installed capacity; non-fossil energy sources will increase the proportion of primary energy consumption to 15.5%; eastern and central China will receive 310 million kilowatts of electricity, including clean energy. It accounts for 50%; it consumes 2.2 trillion kilowatt-hours of clean electricity every year, reducing carbon dioxide emissions by 1.78 billion tons, sulfur dioxide by 880,000 tons, and nitrogen oxides by 880,000 tons.
UHV power grid construction
According to the plan of the State Grid Corporation of China, the UHV power grid will be completed in the east and west synchronous power grids by 2020, and 19 DC projects will be put into operation. The overall structure of the transmission and receiving ends will be clear, and the backbone grids with coordinated development of AC and DC will be formed. The capacity of electricity (commutation) reached 95,000 kilometers and 890 million kVA (kW) respectively. The distribution network shall follow the principles of unified planning, unified standards, safety and reliability, and advanced and applicable principles, optimize the network structure, simplify the types of equipment, increase investment efficiency, enhance the level of intelligence, and effectively solve the outstanding problems of limited power supply capacity and lower power quality. The rapid development of electric vehicles, a large number of distributed power supply access and diversified customer service requirements. The power grids at all levels must plan and coordinate development, optimize the structure of 500 kV power grids in each region, and strengthen the construction of the main 750 kV grid in the northwest to achieve safe, economical, and efficient operation.
Promotion of water, electricity, gas and heat
Distribution network and smart grid construction will usher in a new upsurge. In 2016, the State Grid Corporation of China proposed to speed up the upgrading and upgrading of rural power grids and effectively solve the problems of low voltage, stuck neck, and insufficient power supply in rural power grids. In the first half of the year, it was required to fully complete the 2015 national new rural project of the Ministry of Agriculture, and to complete the addition of seven provincial (municipal) rural power grids and urban distribution network projects during the year. Launched a number of smart distribution network demonstration projects to strengthen the upgrading of old metering devices, installed 60.58 million smart energy meters, and promoted the collection of water, electricity, gas and heat.
Type 05 Pn6-Pn40 is blind flat flange, pressure PN6-PN40, standard is EN1092-1, and we produce ANSI, JIS, EN, DIN flanges. We grant our buyers with our strict quality control system and good serivce. In addition, we also do the United States, Japan, Britain, Germany, the series of products. won a lot of customer recognition, over the same period the company won three national patents.
Type 05 Pn6-Pn40,Type 05 Blind Flange,Type 05 Carbon Steel Forged Flange
Jinan HeChuang Mechanical Manufacturing Co., Ltd. , http://www.hechuangmechanical.com