Recently, some customers have inquired about the debugging and simple maintenance of the piezoelectric valve. After the collection and arrangement of Shenzhen Kerui Sting Technology Co., Ltd., the piezoelectric valve's simple adjustment and maintenance are shared with the new and old customers.
             Piezo valve adjustment maintenance
Adjustment:
Usually there is no need to adjust. The factory-set threshold voltage (valve opening voltage) is 20 to 30 volts. If there is a leak in the closed state or when the threshold voltage range cannot be opened, adjust the adjustment screw located at the center and top of the piezoelectric valve. Note that adjusting the screw is very sensitive and care must be taken not to damage the crystal or seat. Turn clockwise to increase the turn-on voltage (counter-clockwise rotation is reduced). Do not make more than half a turn during adjustment. Each time the adjustment angle is one degree or less. Adjust the voltage to apply the valve until the vacuum system or leak detector indicates the pressure change. Please note that in the case of voltage, increasing the voltage clockwise by the screw requires opening the valve and counterclockwise to reduce the required voltage.
maintain:
Normally no maintenance is required, if the filter contamination requires replacement of the air inlet device. If further maintenance is required, the valve must be returned to the factory.
 Remarks: 1. Cannot be filled with corrosive gas.
2, the pressure of inflation in a pressure around, can not be too large.
Our company focuses on the vacuum and coating equipment industry and is committed to introducing the world's most advanced vacuum products and equipment into China, hoping to create more value for our customers.
The company's main business includes:
1. Infineum SQM360 quartz crystal film thickness monitor, monitor, crystal slice, and electron gun from Switzerland's INFICON.
2, Switzerland INFICON (Infinity) and the United States GP vacuum regulator and controller PSG500, CDG025D, GP275, GP307 and so on.
3, the United States MKS, AE, Switzerland Vogtlin mass flow meter leak detector.
4, Switzerland INFICON company and the United States GP residual gas analyzer (RGA).
5. Piezoelectric valve of American HEY Company.
6, the United States ELIVAC (Iretz) dry screw vacuum pump (dry pump), slide valve pump.
7, Taiwan HTC (Japan) vacuum connections, snaps, seals, bellows, valves, etc., and can customize the vacuum chamber.
8, British EDWARDS (Edward) company rotary vane pumps, dry pumps, molecular pumps, Roots pumps.
9, Switzerland INFICON æ°¦ mass spectrometer leak detector, handheld refrigerant leak detector.
10. Domestic Axon's two-stage rotary vane pump.
We are committed to the research and development of intellighent Assembly Line equipment,hardware automatic painting and powder spraying equipment.Honesty,harmony,innovation and effciency are the values of our enterprises.
ency are the our enterprises.
powder coating line, UV coating line, Reciprocating Spray Line,Gun-fixed Paint Line
Shenzhen Hongdali Machinery Co.,Ltd , http://www.conveyortop.com