The industry competition is getting more and more serious, and the lighting companies need to segment the market.

At present, market segmentation may have become a common concern for lighting companies. In recent years, the development of the lighting industry has been affected by a series of internal and external factors. The development trend of the whole industry is relatively low. Coupled with the ever-increasing number of enterprises, the development of lighting enterprises is also facing a more severe competition situation. Under this circumstance, the lighting companies can only achieve long-term development by subdividing the market and implementing precise positioning. Industry reshuffle is intensifying, and lighting companies need to enhance their competitiveness. The arrival of 2015 also means the new challenges and new opportunities in the lighting industry. In the context of the reshuffle of the lighting industry, enterprises should not be affected by the wave of the market. To eliminate, you need to accurately grasp the needs of users. Nowadays, the bigger the lighting companies are, the more market pressure they have to bear. If their competitiveness cannot be improved, the company is likely to be eliminated in the market of the weak meat. It is true that in recent years, the number of lighting companies has increased sharply, the market share has been decreasing, and a series of problems have been exposed: the phenomenon of homogenization is serious, and the channels are single. In the context of the big market before the problem is exposed to people, the lighting companies should think deeply about introspection, constantly sum up experience and effectively solve the problems exposed by enterprises. The lighting industry segment needs to be based on the relevant industry insiders: the lighting companies must first reach a kind of thinking and understanding, to see and accept the needs of this market and users, the needs of users determine the future direction of enterprise development. First, the lighting companies must meet the future product demand, brand demand and value needs of consumers. The reform of all mechanisms of the second lighting enterprise is to meet the changes in the market and the changes in consumer demand. Lighting companies want to achieve market segmentation, accurate positioning of the market, but also step by step. First, companies can use the terminal agent to feedback, requiring agents to have a deep communication with each customer who consumes a customer, make a record of the customer's use of the product and brand, and then feed the information back to the company. Second, build a database to analyze this information. Thirdly, through professional research institutions, such as zero-point research, through their research on customers including some strange customers, the lighting companies can grasp the user's needs more accurately.

Naipu SPR rubber Vertical Slurry Pumps  are vertical, centrifugal slurry pumps submerged in sump to work.They are designed for delivering abrasive,large particle and high density slurries.These pumps have no need of any shaft seal and sealing water. They can also be operated normally for insufficient suction duties.Wet parts of type NP-SP pump are made of abrasion-resistant metal. All parts of type NP-SP(R) pump immersed in liquid are lined with rubber outer liner.They are suited to transport non-edge angle abrasive slurry.

Typical Applications---

Sump drainage washdown
Floor drainage
Mill sumps
Carbon transfer
Monitoring

Magnetite mixing

NP-SPR Construction Drawing

Main Part Number At The Drawing
 

1.Discharge Pipe 2.Column 3.Strainer 4.Back Liner

5.Impeller 6.Pump Casing 7.Lower Pipe

Materials of Construction
 

	IMPELLERS	CASING	COLUMN	DISCHARGE	SEALS
Standard	High Chrome Alloy  Rubber	High Chrome Alloy  Rubber	Mild Steel Mild Steel Rubber Lined	Mild Steel Mild Steel Rubber Lined	Natural Rubber Rubber
Options	Butyl EPDM Hypalon Polyurethane 316 SS W 151	Neoprene Butyl EPDM Hypalon Nitrile 316 SS W 151	Neoprene Butyl Nitrile 316 SS	Neoprene Butyl Nitrile 316 SS	Nordel Neoprene Viton Hypalon Butyl EPDM

Selection Chart

SP SUMP PUMP PERFORMANCE PARAMETERS

 

Type	Allowable Mating Max. Power(Kw)	Range  Of  Performance					Impeller
		Capacity/Q		Head/m	Speed/rpm	Max Efficiency/%	No. of Vanes	Impeller Diameter/mm
		m³/hr	L/S
40PV-NP-SP	15	19.44-43.2	5.4-12	4.5-28.5	1000-2200	40	5	188
65QV-NP-SP	30	23.4-111	6.5-30.8	5-29.5	700-1500	50	5	280
100RV-NP-SP	75	54-289	15-80.3	5-35	500-1200	56	5	370
150SV-NP-SP	110	108-479.16	30-133.1	8.5-40	500-1000	52	5	450
200SV-NP-SP	110	189-891	152.5-247.5	6.5-37	400-850	64	5	520
250TV-NP-SP	200	261-1089	72.5-302.5	7.5-33.5	400-750	60	5	575
300TV-NP-SP	200	288-1267	80-352	6.5-33	350-700	50	5	610

Spr Rubber Vertical Slurry Pump

Spr Rubber Vertical Slurry Pump,40Pv Rubber Slurry Pump,65Qv Rubber Vertial Pump,100Rv Rubber Slurry Pump

Shijiazhuang Naipu Pump Co., Ltd. , http://www.naipu-pump.com