The latest US car child safety seat debut

The latest US car child safety seat debut In movie shooting, stunt actors sometimes need to jump off high places. In order to prevent injuries, they have specially designed airbags where they fall and absorb impact energy. The American Doller Junior Group Company gained inspiration from this, applying airbag technology to child seats to provide more safety protection for child passengers in the event of a side collision.

It is reported that, four years ago, Dorell Company began to study the impact of children riding in safety seats in the event of a side collision. The company collaborates with several children's hospitals in the United States and the Kettering University Security Collision Center to study how to quantify impact forces.

Based on this, Dorell developed a unique side impact air protection technology. In simple terms, the company installs specially designed airbags on both sides of the child's head close to the child's head. These airbags not only absorb and cushion side impact forces, but also help prevent children's head and neck sprains; further In fact, Dorel Air Protection System is not only to protect children's safety, but also to control the release of air in the airbag to minimize the impact of children in the side impact of the vehicle.

"Products have been marketed and promoted." Barry Mohaner, executive vice president of children restraint systems at Dorell said, "The air protection system is very effective, its principle and structure are relatively simple, so the cost is not high, it is expected to be widely used."

According to reports, Dorell Corporation has shared scientific research results with the US National Highway Traffic Safety Administration, and hopes that its research results will help improve the side impact testing standards.


Air-Fluid PTFE Washer Push in Type Fittings

Cixi Air-Fluid Teflon Washer Fitting is a new featured products introduced by Cixi Air Fluid Company ,which can be interchanged with BSPP ,BSPT & NPT Threads ,Non Leakage.


Teflon Washer with the most uprising characteristics as below:
A.Resistant to many chemicals, includes ozone, chlorine, acetic acid, ammonia, sulfuric acid and hydrochloric acid.
B.Weather and UV resistance
C.Non Stick::Very few solid substances will permanently adhere to a Teflon coating. While tacky materials may show some adhesion, almost all substances release easily.
D. Outstanding performance at extreme temperatures to meet your special temperatures 'demands: it can temporarily withstand temperatures of 260C and cryogenic temperatures of -240C and still with the same chemical properties. Its initial melting point of 342C (+- 10C) & second melting pint at 327C (+- 10C).
E:The Teflon Washer Series Fittings with Class-A O-ring ,The FKM O-RING available for special required .


Teflon Washer Metal Push in Fittings

Teflon Washer Metal Push In Fittings, Pneumatic Metal Teflon Washer, Teflon Washer Metal

Ningbo Air-Fluid Pneumatic Components Co., Ltd , http://www.air-fittings.com

This entry was posted in on