According to the requirements of the relevant department's museum security design, the museum vault doors anti-theft alarm equipment Tianqi readily available, with anti-theft as the core, the museum vault door should choose the C-level security system, using modular, structured design to meet the system The choice of future scalability and upgradeability is highly practical.
An alarm device is installed on the cashbox door to generate an alarm signal when the door body is subjected to an impact force of 1600N or more, or when flame cutting is performed, and the electronic code lock (Hand Reader/Fingerprint Lock) enters the wrong password three times in succession. The alarm device should be installed in a concealed and reliable location, will not suffer external damage, and will not affect the opening of the door. There must be a signal output interface that meets the requirements of 4.2.9 in GB10408.1 to be networked with the security monitoring system of the heritage warehouse.
The appearance and structure of the museum's vault door: The gap between the door frame and the front of the door leaf is not more than 1mm, and there should not be any obvious protrusions, depressions or scratches. All steel parts should be treated with anti-corrosion measures, including spraying, electroplating, spraying, painting or other equivalent measures. Welds should not be welded at the welding points; when different metals are used in combination, electrical corrosion should be prevented; outside the door frames and door leaves The surface should be smooth and not more than 2mm. The clearance between the door and the body and the upper and the lower sides of the heritage warehouse should not exceed 2.5mm, and the gap with the bottom should not exceed 5mm, and the library should not be directly viewed through the gap. The steel door frame and the steel bar protruding from the wall are firmly welded together. The welding points on the left and right sides shall not be less than 6 points, and the upper frame shall be no less than 3 points. Ensure that the door frame is perpendicular to the horizontal plane.
An alarm device is installed on the cashbox door to generate an alarm signal when the door body is subjected to an impact force of 1600N or more, or when flame cutting is performed, and the electronic code lock (Hand Reader/Fingerprint Lock) enters the wrong password three times in succession. The alarm device should be installed in a concealed and reliable location, will not suffer external damage, and will not affect the opening of the door. There must be a signal output interface that meets the requirements of 4.2.9 in GB10408.1 to be networked with the security monitoring system of the heritage warehouse.
The appearance and structure of the museum's vault door: The gap between the door frame and the front of the door leaf is not more than 1mm, and there should not be any obvious protrusions, depressions or scratches. All steel parts should be treated with anti-corrosion measures, including spraying, electroplating, spraying, painting or other equivalent measures. Welds should not be welded at the welding points; when different metals are used in combination, electrical corrosion should be prevented; outside the door frames and door leaves The surface should be smooth and not more than 2mm. The clearance between the door and the body and the upper and the lower sides of the heritage warehouse should not exceed 2.5mm, and the gap with the bottom should not exceed 5mm, and the library should not be directly viewed through the gap. The steel door frame and the steel bar protruding from the wall are firmly welded together. The welding points on the left and right sides shall not be less than 6 points, and the upper frame shall be no less than 3 points. Ensure that the door frame is perpendicular to the horizontal plane.
High Chrome Cast Ball special used to gold and copper mining, because of its high hardness 60 to 65HRC and very good wear resistance. High chrome Cast Grinding Ball is chrome content 10% and above, and what's needed the low carbon ferrochrome. So High Chrome Ball price will be a little high. Available size also is 20mm to 140mm.
High Chrome Cast Grinding Iron Ball
Iron Ball,High Chrome Cast Iron Ball,High Chrome Cast Ball,High Chrome Cast Grinding Iron Ball
Jinan Zhongwei Casting And Forging Grinding Ball Co.,Ltd , https://www.cngrindingballs.com