The sewage suction truck is a very important tool for cleaning the city's sewage pipeline, because the existence of a sewage suction truck can reduce secondary pollution such as sewage and silt, and at the same time reduce the pollution of sewage and land, rivers, etc., but because the sewage suction truck usually works. The environment is very complex, if you do not pay attention to the matter is likely to cause the body of the trauma, so be sure to pay attention to the attention of the suction truck during use, then the use of sewage suction car is what?
We all know that the vacuum level of the sewage suction truck is very high. Therefore, when choosing materials, we must not choose poor quality sheets. This can easily lead to problems such as the deformation of tanks without vehicles. At the same time, when selecting the vacuum kit, it is necessary to have a certain understanding of the pressure capability and temperature difference of the kit. According to different environments, the material requirements for the rear tank cover of the sewage suction truck are also different. We need to choose according to the local operating environment and temperature difference conditions.
Before using the sewage suction truck, it is best to move the rear part of the sewage suction truck close to the working point. At the same time, it is also necessary to check the condition of the oil inlet pipe by turning the return oil tank straight screw plug and the inlet pipe axis at an angle of about 45°. There is no lubrication flow. At the same time, in order to prevent the suction pipe from buckling, it is necessary to use a sewage suction truck to swing away from the suction hose after it has been removed.
During the operation of the sewage suction truck , the sewage suction pipe must be as deep as possible into the sewage fluid to ensure that the tail end of the working pipe is always under 300 mm under the sewage liquid during the operation. At the same time, the four-way valve handle of the sewage suction truck needs to be pushed to a position perpendicular to the ground. Sewage suction vehicles cannot inhale materials larger than the diameter of the hose and cannot transport waste oil and some dangerous articles at the same time. When the sewage is transported, the sewage suction car must also pay attention to its own driving speed, and can not carry out sharp turning and sudden braking to prevent the inside of the tank. It is dangerous because of the high center of gravity of the wave plate. We must strictly follow the precautions of the sewer truck in order to effectively avoid the danger.
Product introduction
WeMainly used for 0.5 ~ 25 mm size fractions of coal or coal dewatering, maximum size should be.
Type meaning
T L L - 1000
T:DEHYDRATION
L:VERTICAL CENTRIFUGER
1000:SCREEN MESH BIG END DIAMTER
Oder information
Specify the equipment specifications;
Specify the screen gap size, does not indicate the supply according to 0.5mm;
Another order spare parts;
|
number |
|
1 |
|
model |
|
LL3 --9 |
|
conjugate |
mm |
930 |
|
interval |
mm |
0.5 |
|
Rotate speed |
rmp |
562 |
|
Rotor speed |
mm |
554 |
|
granularity |
|
0.5~13 |
|
moisture |
|
18~30 |
|
Product external moisture |
|
5~8 |
|
power |
kw |
45 |
|
Motor power |
kw |
0.75 |
|
size |
mm |
2785*2045*22 |
|
weight |
ton |
6.7 |
Company Introduction
Luoyang Hong Xin Heavy Co., LTD. is located in Luoyang Xin'an Industrial Park, Luoyang Hongxin Heavy Machinery Co., Ltd is an enterprise featured with industrial designing, processing and manufacturing, which is qualified for import-export trade. Covering an area of 15,000 square meters and holding an annual production value of 80 million RMB, the company of 20 million RMB registered capital has total 100 staff members, among which there are 20 engineering technicians owning senior and medium professional titles and 40 intermediate and senior technicians capable of product designing and developing.
Hongxin is dedicated to produce reducers, hoists, crushers, Ball Grinding Mills and the equipments of screening, coal washing, metallurgy and cement, and replacement parts. Meanwhile, we provide the perform maintenance service for various series of equipments. There are 52 large-scale equipments applied into the manufacturing process, such as T200 CNC floor boring and milling machine, YK 73125 CNC molding gear grinding machine, YK322B CNC molding gear grinding machine, Y3200 gear hobbing machine, Y1600 CNC gear sharper, 4m vertical lathe, 6.3m CNC vertical lathe, T110 CNC boring machine, and 52 middle-sized productive and assistive equipments, which integrate strong manufacturing and processing capability with complete managing system of production and technology, quality management system and comprehensive testing measures.
Certificates
Contacts
Centrifugal Dehydrator,Commercial Centrifugal Dehydrator,Centrifugal Dehydrator Machine,Industrial Centrifugal Dehydrator
Luoyang Hongxin Heavy Machinery CO., TLD. , https://www.hxreducer.com