Chao Chao's latest development: 450,000 supercars to be renovated at the end of June 2018


Starting from September 21, 2016, the maximum allowable total mass limit specified in the “Outline Dimensions, Axle Loads, and Quality Limits of Automobiles, Trailers, and Automobile Trains” shall be strictly followed to harmonize the vehicle load limit criteria. Among them, six-axle and six-axes or above automobile trains have a total cargo mass of more than 49,000 kilograms, of which the drive axle of the tractor is single-axle, and the total mass of truck goods exceeding 46,000 kilograms is considered as an over-limit transport vehicle.


Regarding the implementation of the unified policy on the weight limit of 49 tons, due to the current buffer period, the progress of implementation varies from place to place, and the access to docks in some areas of South China began to be calculated strictly according to a maximum of 55 tons, while some areas in the lower reaches were previously heavily loaded. Over 55 tons, if you reduce the heavy load later, it will directly increase the cost.

Today, along with the National Development and Reform Commission, the People's Bank of China, the Ministry of Transport, the Central Propaganda Department, the Central Civilization Office, the Central Network Information Office, the Supreme People's Court and other 36 departments jointly signed the "About the serious violations of the law unbelievably overloaded transport vehicles The “Memorandum of Cooperation for Responsible Responsibility Subjects to Implement Joint Responsibility” was published. What progress has been made in the management of overloaded overloads? How will the next step be remedied?

How many cars need renovation?

The country does not meet the national standard "1589" semi-trailer and nearly 450,000 goods vehicles.

According to statistics from the public security department, as of the end of 2016, there were 410,000 semi-trailers exceeding the national standard length of “1589”, including 110,000 meters of semi-trailer semi-trailer 110,000, and 300,000 super-standard containers and container semi-trailers. There are about 40,000 trucks for goods vehicles in the country, of which more than 90% are illegal vehicles.

Overload limit control situation?

Overrun rate decreased by 34%! Overload decreased by 57%! Double row of cars disappeared from the highway!

In August last year, the Ministry of Communications, the Ministry of Public Security, the Ministry of Public Security, the State Administration for Industry and Commerce and the General Administration of Quality Supervision, Inspection and Quarantine jointly issued the Opinions on Further Improving the Illegal Refitting of Freight Cars and Overload Restrictions, jointly convening illegal refitting and overloading of trucks across the country. The work of video conference call was regulated. In September last year, a new round of overreaching work was launched. Last December, statistics showed that the vehicle overrun rate at checkpoints exceeded the year-on-year rate of 34%, and the number of severely overloaded vehicles dropped by 57% year-on-year. “Dual-row” vehicle carriers have basically disappeared from the expressway.

The next goal of governance?

"Single row" changed to "standard car", and by the end of June 2018, all non-compliant vehicles were renewed!

The next step of governance will enter the key governance stage of “single-car” and “standard car”. The Ministry of Communications will work with the Ministry of Industry and Information Technology, the Ministry of Public Security, and other relevant ministries to further strengthen the management work, strictly enforce the law and control, refine the implementation of the task, and ensure that 60% of non-compliant vehicle transporters will be renewed and upgraded by the end of 2017, and by 2018 By the end of June, the goal of renovating all non-compliant vehicle transporters will be completed.







FM-C Series Fiber marking machine, a breakthrough innovation through continuous exploration, is designed by mechanical engineers, industrial designers, electrical engineers and other technical personnel of our company. it is a perfect interpretation of what beauty is in mechanic, industry and product itself. Small and portable, suitable for working on big workpiece

Portable Type Laser Marker

Fiber Laser Engraver,Portable Type Laser Marker,Laser Engraver For Metal,Laser Engraved Pendant

Shandong Meiman Laser Technology Co., Ltd. , https://www.meimanlasers.com

This entry was posted in on