**Steel Price Update – April 5, 2025**
Here is the latest update on steel prices across various specifications and manufacturers. Prices have seen a general upward trend in most categories, reflecting increased demand and supply-side constraints.
| Product Name | Specification | Material | Factory/Origin | Price Today (yuan/ton) | Yesterday Price (yuan/ton) | Change (yuan/ton) |
|-------------|---------------|----------|----------------|------------------------|----------------------------|-------------------|
| High-line | φ6.5-10mm | Q235 | Shougang | 4550-4560 | 4430-4440 | +120 |
| High-line | φ6.5-10mm | Q235 | Tangshan Steel | 4550-4560 | 4430-4440 | +120 |
| High-line | φ6.5-10mm | Q235 | Xuanhua | 4550-4560 | 4430-4440 | +120 |
| Rebar | φ12-14 | HRB335 | Shougang | 4680-4690 | 4580-4590 | +100 |
| Rebar | φ16-25 | HRB335 | Shougang | 4550-4560 | 4450-4460 | +100 |
| Rebar | φ12-14 | HRB335 | Tangshan Steel | 4680-4690 | 4580-4590 | +100 |
| Rebar | φ16-25 | HRB335 | Tangshan Steel | 4550-4560 | 4450-4460 | +100 |
| Hot Rolled Plate | 2.0*1250*C | Q235 | Taigang | 5250-5300 | 5100-5150 | +150 |
| Cold Rolled Sheet | 1.0*1000*2000 | ST12 | Angang | 5850-5900 | 5750-5800 | +100 |
| Galvanized Sheet | 1.0*1000*C | DX51D+Z | Benson Steel | 5650-5700 | 5550-5600 | +100 |
| Seamless Tube | 76*4.5 | 20# | Tianjin | 5750-5800 | 5600-5650 | +150 |
| Welded Pipe | 1 inch/3.0mm | Q235 | Youfa | 4900-4910 | 4900-4910 | No change |
| Angle Steel | 50mm*50*5/6m | Q235 | Zhaobo | 4450-4460 | 4300-4310 | +150 |
Overall, the steel market remains strong with continued price increases across multiple product lines. The rising costs are driven by higher raw material prices, transportation expenses, and seasonal demand. Buyers are advised to monitor the market closely for any further fluctuations. If you're looking for more detailed information or specific product inquiries, feel free to reach out.
Tungsten Carbide Roll Rings
Tungsten Carbide Roll Rings, also known as hard alloy roller ring, has been widely used in the rolling production of high-speed wire, bar, threaded steel, seamless steel pipes, etc. due to its good wear resistance, high-temperature hardness, heat fatigue resistance, thermal conductivity, and high strength.
The Tungsten Carbide Roll Rings we produce mostly come in two series: WC Co and WC Co Ni Cr, with Co and Co Ni Cr as binders ranging from 6wt% to 30wt%. From a usage perspective, hard alloy rollers have good comprehensive mechanical properties, with a bending strength of over 2200 MPa and an impact toughness of (4-6) × At 10 ^ 6J/m ^ 2, the Rockwell hardness (HRA) can reach 78~90. During the high-speed wire rolling process, the single groove steel passing amount is much higher than that of cold hard cast iron or high-speed steel rollers.
Tungsten Carbide Sleeve,Tungsten Carbide Roller, Steel Rebar Rolling,Steel Wire Rod Rolling,WC Roller
Luoyang Golden Egret Geotools Co., Ltd. , https://www.xtc-thermalspray.com