Lithium battery is self-igniting after Samsung mobile phone is electric skateboard

According to foreign media reports, this year's lithium battery can not really save people's minds. After the Samsung Note 7 explosion accident and the suspension board burned millions of luxury homes, the electric skateboard also had problems.

This week, a US electric skateboard manufacturer called Boosted warned users to immediately deactivate the company's second-generation electric skateboards because they received reports of two lithium batteries overheating. Boosted said that they have stopped selling electric skateboards, and the next step will be to investigate the cause of battery overheating.

Due to the timely discovery, the two battery overheating accidents did not cause personal or property damage. However, the company still reminds consumers not to place electric skateboards near flammable materials. It is best to take out the batteries and wait for the company's follow-up investigation.

In addition, Boosted also said that if users have encountered similar overheating problems, please report to the company as soon as possible.

In fact, the lithium battery is prone to overheating and spontaneous combustion. The industry has known for many years, but because of its small size and light weight, manufacturers are not willing to give up this solution. In the past few years, lithium batteries have caused a lot of fires, including Samsung Galaxy Note 7, suspension board and Boeing 787 Dreamliner.

Lithium battery is self-igniting. Samsung mobile phone is followed by electric skateboard.

Ptfe Pleated Filter Cartridge

Ptfe Membrane Filter Cartridge is with hydrophilic or hydrophobic membrane, hot melted   with PP corn or stainless steel corn. Good integrality, free of surfactants. It can be used for gas and Liquid Filtration.


● Features and Benefits

Strong hydrophobicity; 
Absolute filtration under the wet environment;
Wide chemical compatibility, resistant to strong alkali, acids, aggressive gases and solvents, ozone;
Geometrically unique pores, long service life, excellent performance
High temperature endurance performance
Biological safety and good pyrogen control 
Irreplaceable filter materials.
All products have passed 100% integrity testing.
● Micron Rating(µm): 0.10   0.20   0.45   1.00   5.00


● Typical Applications

1. Tank vent, Fermentation air;
2. Compressed air, CO2 line sterile filtration;
3. Air Filtration in aseptic packaging;
4. Aggressive acids, Bases, Solvents;
5. Photoresists, Etch Solutions;


● Materials of Construction

Filter Media:  PTFE
Support Layer: Polypropylene
Inner Core: Polypropylene
Outer Core: Polypropylene/Stainless Steel


●Cartridge Dimensions

Outer Diameter: 68mm
Inner Diameter: 33mm
Effective Filtration Area: ≥0.65m2
Length: 2.5"~40"


●Operation Conditions

Normal Operating Temperature: ≤65℃
Max. Operating Temperature: 90℃(△P≤0.10Mpa)
Max. Differential Pressure:  Normal Flow direction:4.2 bar at 25℃
Reverse Flow direction: 2.1 bar at 25℃
Steam Sterilization for 30 minutes at 140±2℃
PH Value compatibility: 1-14


●Cartridge Safety

Endotoxin: <0.25 EU/ml
Extractable: 0.03g/10"

PTFE Pleated Filter Cartridge

Air Filter Cartridge,Ptfe Pleated Filter Cartridge,Ptfe Membrane Filter Cartridge,Ptfe Filter Cartridge

Ji'an city Qing Feng Filter Equipment Material CO.,Ltd , https://www.qingfengfilter2.com

This entry was posted in on