The most critical part of choosing a six-seater bus is quality, including the appearance of the six-passenger car, the quality of the car assembly, the quality of the chassis and the engine, and the quality of electrical accessories. All require the purchaser to take the manufacturer to a closer inspection.
1. When most car owners purchase six buses, it is easy to ignore the design quality. In fact, the quality of the design is also linked to the quality of the vehicle. The quality of the appearance of a six-seater bus is probably correct in terms of layout and material selection. For example, the design angle of the steering wheel hinders the line of sight between the driver and the instrument panel, the position of the transmission lever is relatively far, and so on. The seat back angle of the six-seat passenger car is too small, and the space for landing is relatively narrow. Oppression is not comfortable. And a more reasonable humanized bus, whether it is riding a car or driving a car is a good ride experience.
2. The quality of six-seat passenger cars sprayed on the body. The quality of the body spray of the six-seat buses is related to the aesthetics of the entire car. As important, it is also related to the corrosion protection of the passenger car skin. The outer skin needs to be flat. In the case of backlighting, there will be no unevenness on the side. When we look at the paint surface of the six buses, there is no bubble point. The corners, door edges, and the edges of the window frames are not visible. Any rust.
3. The quality of the electrical configuration of the six-seater bus is mainly to check whether the wiring harness under the dashboard is stable, the fuse box device is also relatively neat, the position can be easily checked and maintained, and the boundary arrangement and direction of the engine are all complete. It is reasonable that six passenger buses with six ASR and ABS buses controlled by microcomputers need to be inspected in accordance with the factory standards of the manufacturers. Are all of them qualified and valid?
4. The quality of the chassis of the six-seat bus must be better, and the power of the engine should also be suitable. The high-quality coach chassis has no defects in the stretch technology, so that it can provide greater protection for the quality of the entire vehicle. If the quality and power of the six-seat passenger car are relatively large, when it is in operation, it will be more likely to cause a major earthquake. At the same time, it will damage the chassis and the most weak parts related to the car body, which will also affect the The driving safety of six passenger cars, if their power is too small, will also affect the power of the vehicle, so the best is the best.
Brass has excellent CNC Machining Turning performance, high-speed machining turning under the brass can get excellent surface finish. Our technical team has very good experience in machining brass, machining brass including brass plate, brass rod, brass tube. Brass hardware parts has high strength, good plasticity in hot state, good plasticity in cold state, good machinability, easy welding and good corrosion resistance. Brass parts are very durable. It is electrically conductive and does not usually corrode or deteriorate over time. Thus brass is often used to produce products with longer service life. Machining brass parts Widely used: pipes, radiators, ship parts.
Machining Brass, Brass Machined Parts, Perfessional Brass Parts Machining, Machining Brass Conponents, Brass Parts Machining
Hong Kong RYH CO., LTD , https://www.szcncturning.com