Marengo FD lieutenant resigns after returning stolen money

The Northwest Herald recently published a story regarding the resignation of a lieutenant from the Marengo Fire Department. According to multiple sources, Lt. Russ Kahl stepped down on Tuesday after being discovered taking $6,700 from the Marengo Fire Rescue Association, a nonprofit that supports volunteer firefighters. Kahl, who had served as president of the association for nearly two years, was involved in three separate incidents this month where he withdrew funds. The current president, Scott Klaassens, who took over the role just days ago, confirmed the details. Kahl has since returned the money and resigned, but the matter is still under investigation. “We made the decision as a board that he shouldn’t be charged at this time,” Klaassens explained. “However, the case remains open pending the results of our audit.” The incident came to light when the association’s treasurer, Klaassens, noticed several unauthorized withdrawals. The organization has internal policies in place to prevent such actions, and now plans to conduct a full financial audit to ensure no other funds were misused. Additionally, the board will review and strengthen its financial procedures moving forward. Fire officials clarified that the money taken came from private donations within the association and did not involve public funds. The Marengo Fire Rescue Association relies on donations to purchase equipment and supplies not covered by state funding, supporting the volunteer firefighters. Marengo Police Chief Joseph Hallman stated that his department was informed last week but couldn't proceed with an investigation until a formal complaint was filed. He noted that the fire department handled the issue internally, and no charges have been pressed so far. This event has raised concerns about financial oversight within the nonprofit, and the community is watching closely as the association works to restore trust and improve transparency.

Plate Heat Exchanger U Series

Plate Heat Exchangers (PHEs) are highly efficient devices used for heat transfer between two fluids. The U Series of plate heat exchangers is a specific design known for its compactness, flexibility, and high thermal efficiency. Below is a detailed classification and introduction to the U Series Plate Heat Exchangers:

1. Based on Design Features

  • Gasketed Plate Heat Exchangers:

    • Uses gaskets to seal plates and create flow channels.

    • Easy to disassemble for cleaning and maintenance.

    • Suitable for applications with moderate temperature and pressure.

  • Brazed Plate Heat Exchangers:

    • Plates are brazed together using copper or nickel.

    • Compact and leak-proof design.

    • Ideal for high-pressure and high-temperature applications.

  • Welded Plate Heat Exchangers:

    • Plates are welded together for a robust construction.

    • Suitable for corrosive or high-temperature fluids.

    • Commonly used in industrial applications.

      2. Based on Flow Configuration

      • Single-Pass U Series:

        • Fluids pass through the heat exchanger once.

        • Simple design with lower pressure drop.

      • Multi-Pass U Series:

        • Fluids pass through the heat exchanger multiple times.

        • Increases heat transfer efficiency but may result in higher pressure drop.

          3. Based on Application

          • HVAC U Series:

            • Used in heating, ventilation, and air conditioning systems.

            • Efficient for heat recovery, chillers, and heat pumps.

          • Industrial U Series:

            • Designed for industrial processes such as chemical, food, and pharmaceutical industries.

            • Handles high temperatures, pressures, and corrosive fluids.

          • Refrigeration U Series:

            • Used in refrigeration systems for evaporators or condensers.

            • Compact and efficient for low-temperature applications.

          • District Energy U Series:

            • Connects to district heating or cooling networks.

            • High-capacity and energy-efficient.

              4. Based on Plate Material

              • Stainless Steel Plates:

                • Corrosion-resistant and durable.

                • Suitable for most applications, including food and beverage industries.

              • Titanium Plates:

                • Highly resistant to corrosion, especially in seawater or chloride environments.

                • Used in marine or chemical industries.

              • Nickel Plates:

                • Resistant to high temperatures and corrosive fluids.

                • Ideal for chemical processing or oil and gas industries.

                  5. Based on Gasket Material

                  • Nitrile (NBR) Gaskets:

                    • Suitable for water, oils, and low-temperature applications.

                  • EPDM Gaskets:

                    • Resistant to high temperatures and steam.

                    • Commonly used in HVAC and heating applications.

                  • Viton (FKM) Gaskets:

                    • Resistant to aggressive chemicals and high temperatures.

                    • Used in chemical or industrial applications.

plate heat exchanger,plate type heat exchanger,plate exchanger,plate and frame heat exchanger,phe heat exchanger,plate heat exchanger gasket,industrial heat exchanger,thermal heat exchanger,heat exchanger hvac,high efficiency heat exchanger

Siping Juyuan Hanyang Plate Heat Exchanger Co., Ltd , https://www.tj-heatexchange.com

This entry was posted in on