The impeller of the flotation machine is the most important component of the flotation machine. In industrial production, the impeller speed of the flotation machine is an important technical parameter. To ensure that the flotation machine reaches the rated speed, the basic measure is to make the triangular belt on the tape reach the specified amount, the tightness is moderate, and the tension of each V-belt is similar.
The insufficient number of flint belts or the unevenness of the flotation machine is an important reason for the insufficient number of revolutions of the flotation machine. It is also necessary to clean the flotation machine regularly. Due to the large alternating stress caused by the flotation machine flotation impeller in the working process, it will inevitably cause wear and even damage. When the flotation machine flotation wearer is large, the surface is cracked, scratched or napped, and the water jacket has cracks or leaks, it should be repaired. When the floatation flotation of the flotation machine is worn to a difference between the maximum diameter and the minimum diameter of 0.5-0.9 or the flaw is greater than 0.5-1 mm, the cylinder should be performed.
The impeller is mainly dispersing air, for which purpose an air distributor is provided in the impeller chamber. The air distributor can distribute the air more evenly in most areas of the rotor blade, providing a large amount of slurry air interface, thereby improving the ability of the impeller to disperse air and improve air dispersion. When the flotation machine is used normally, the state of the impeller is also an important guarantee for the flotation result, so its maintenance and maintenance can not be ignored.
Cnc Mill,Small Cnc Milling Machine,Boring Machine,Desktop Cnc Milling Machine
WEISS MACHINERY CO., LTD. , https://www.weissmachinery.com