Milan, Italy — Baosheng is currently manufacturing an injection molding machine with a clamping force of 6,600 tons, marking the largest machine ever produced by the company. The unit is expected to be shipped to Jcoplastic SpA this fall, signaling a major milestone for both companies.
Based in Battipaglia, Italy, Jcoplastic specializes in producing large bins and gardening equipment. This new machine will be used to manufacture 2,200-liter wheeled containers. The two-injection-unit system can handle up to 100 kg of material per cycle. Liam Burns, general manager of Pou Sheng America, explained that the injection units are arranged side by side in parallel, optimizing efficiency and precision.
In addition to the injection system, Baosheng has also supplied an automated production line. Once the robot removes the finished bin, the automated device grinds the workpiece, inserts it into the wheel, and conducts a full inspection of the final product. This level of automation ensures high-quality output and reduces manual labor.
Before the 6,600-ton machine was built, there had been previous excitement around the transportation of massive molds. Earlier, German suppliers transported enormous templates through the Mont Blanc Tunnel, which connects France and Italy. The process caused a three-hour traffic jam when the tunnel was temporarily closed due to the oversized cargo. Each mold measured 4.4 meters wide and 4 meters tall.
The newly built machine itself is 26 meters long and weighs 582 tons. It can accommodate molds weighing up to 132 tons, making it one of the most powerful injection molding systems in the industry. With this investment, Jcoplastic is set to enhance its production capabilities significantly, supporting its expansion in the European market.
Plastic Lumps Shredder,Ce Plastic Blocks Single Shaft Shredder,Plastic Lumps Single Axle Shredder,Pe Lumps Recycling Shredde
DILOYA GROUP CO.,LTD. , https://www.diloyacn.com